Lines Matching refs:devices

3     As of 2.6.10, serial devices on ia64 are named based on the
6     /dev/ttyS1, etc., and PCI devices are named sequentially
7     starting after the ACPI devices.
12 	  table[1] that tells the kernel about devices that can be used
14 	  or the EFI ConOut path contained only UART devices, the
22     Any additional ACPI or PCI devices were registered sequentially
27     change, but we registered devices that might not really exist.
45     EFI knows what your console devices are, but it doesn't tell the
48     devices are, but not all firmware supplies it.  Also, EFI supports
74     all the serial devices, which can happen a minute or more after the
95 	- Multiple UARTs selected as EFI console devices.  EFI and
96 	  elilo use all selected devices, but Linux uses only one.
114 	  devices.  Use "console=uart, io,0x3f8" (or appropriate
127     No ACPI serial devices found in 2.6.17 or later:
130 	  serial devices were discovered by 8250_acpi.  In 2.6.17,
148 [3] EFI console devices are configured using the EFI Boot Manager