Lines Matching refs:you

41 SMBus - you can not access it on I2C levels. The good news is that it
42 natively understands SMBus commands and you do not have to worry about
53 different 'functions', which can be considered as separate devices). If you
54 find such an entry, you have a PIIX4 SMBus controller.
57 default. If you use the insmod parameter 'force=1', the kernel module will
59 correct address for this module, you could get in big trouble (read:
66 you will get into big trouble! DON'T USE THIS IF YOU ARE NOT VERY SURE
70 The PIIX/PIIX3 does not implement an SMBus or I2C bus, so you can't use
81 If you own Force CPCI735 motherboard or other OSB4 based systems you may need
90 2) Now you just need to change the value in 0xD2 register. Get it first with
92    If the value is 0x3 then you need to change it to 0x1
95 Please note that you don't need to do that in all cases, just when the SMBus is