Lines Matching refs:values
15 the CPU. Also, some values reported by the chips need some computation
18 range using external resistors. Since the values of these resistors
24 values conversion, labeling of inputs and hiding of unused inputs.
44 All sysfs values are fixed point numbers.
63 When setting values of hwmon sysfs attributes, the string representation of
76 Read/write values may be read-only for some chips, depending on the
134 Because of this variation, values are generally NOT scaled
139 thumb: drivers should report the voltage values at the
209 Some chips only support values 1, 2, 4 and 8.
271 Which values are possible depend on the chip used.
291 channels and temperature channels: the PWM values are associated to PWM
292 output channels while the temperature values are associated to temperature
295 mapped to a given PWM output, this leads to several candidate PWM values.
342 corresponding temp_max values.
356 corresponding temp_crit values.
368 corresponding temp_min values.
416 above should contain values expressed in millivolt instead of millidegree
702 other values is unsupported.
749 Example2, fan divider setting, valid values 2, 4 and 8: