Lines Matching refs:values

69 For reference, here are a few values about clock dividers:
79 For the curious, here is how the values above were computed:
88 Note that not all RPM values can be represented, even when the best clock
97 PWM (pulse width modulation) values range from 0 to 255, with 0 meaning
100 Be extremely careful when changing PWM values. Low PWM values, even
102 hardware if temperature increases too much. When changing PWM values, go
105 One user reported problems with PWM. Changing PWM values would break fan
142 well as the values of the resistors used for division is left to the
145 recommended resistor values for some voltages, but this still leaves much
167 which case cached values are returned instead). As a consequence, when
182 The datasheets suggests that some values (fan mins, fan dividers)