Lines Matching refs:speed
54 There are 4 to 5 fan rotation speed sensors, 8 to 15 analog voltage sensors,
68 triggered if the rotation speed has dropped below a programmable limit. On
71 do not have a fan speed divider. The driver sets the most suitable fan divisor
72 itself; specifically, it increases the divider value each time a fan speed
73 reading returns an invalid value, and it reduces it if the fan speed reading
91 pwm[1-5] - this file stores PWM duty cycle or DC value (fan speed) in range:
92 0 (lowest speed) to 255 (full)
95 * 0 Fan control disabled (fans set to maximum speed)
141 there are no changes to fan speed. Once the temperature leaves the interval, fan
142 speed increases (if temperature is higher that desired) or decreases (if
151 pwm[1-5]_step_up_time milliseconds before fan speed is increased
152 pwm[1-5]_step_down_time milliseconds before fan speed is decreased
160 This modes tries to keep the fan speed constant.
162 fan[1-5]_target Target fan speed
164 Target speed tolerance
172 This mode offers multiple slopes to control the fan speed. The slopes can be
178 critical temperature mode, in which the fans should run at full speed.
191 pwm[1-5]_step_up_time milliseconds before fan speed is increased
192 pwm[1-5]_step_down_time milliseconds before fan speed is decreased