Lines Matching refs:and

12     Addresses scanned: I2C 0x4c and 0x4d
17     Addresses scanned: I2C 0x4c and 0x4d
27     Addresses scanned: I2C 0x4c and 0x4d
32     Addresses scanned: I2C 0x4c and 0x4d
37     Addresses scanned: I2C 0x4c and 0x4d
42     Addresses scanned: I2C 0x4c and 0x4d
83                            0x4c, 0x4d and 0x4e
89                            0x4c, 0x4d and 0x4e
105                            0x4c, 0x4d and 0x4e
143 MAX6658 and MAX6659 variants. The extra features of the MAX6659 are only
146 The MAX6680 and MAX6681 only differ in their pinout, therefore they obviously
147 can't (and don't need to) be distinguished.
150 family is that it features critical limits with hysteresis, and an
158   * Filter and alert configuration register at 0xBF.
161 LM86 and LM89:
174   * SMBus PEC support for Write Byte and Receive Byte transactions.
180 MAX6657 and MAX6658:
190 MAX6680 and MAX6681:
194 MAX6695 and MAX6696:
202   * Filter and alert configuration register at 0xBF
207   * The AWG and ASG variants only differ in package format.
215 temperature, except for the MAX6657, MAX6658 and MAX6659 which have a
218 Each sensor has its own high and low limits, plus a critical limit.
222 Only the local hysteresis can be set from user-space, and the same delta
233 the status register is read and the faulty temperature channel is logged.
235 The Analog Devices chips (ADM1032, ADT7461 and ADT7461A) and ON
238 an alert is received, and is re-enabled only when the alarm is gone.
248 When reading a register value, the PEC byte is computed and sent by the
253 value differs from what the SMBus master expects, and all reads fail.
256 the bus supports the SMBus Send Byte and Receive Byte transaction types.
258 SMBus Read Byte, and PEC will work properly.
274 sysfs. Just write 0 to the "pec" file and PEC will be disabled. Write 1