Lines Matching refs:and

5   * SMSC DME1737 and compatibles (like Asus A8000)
8     Datasheet: Provided by SMSC upon request and under NDA
16     Datasheet: Provided by SMSC upon request and under NDA
20     Datasheet: Provided by SMSC upon request and under NDA
29 * force_start: bool	Enables the monitoring of voltage, fan and temp inputs
30 			and PWM output control functions. Using this parameter
33 * probe_all_addr: bool	Include non-standard LPC addresses 0x162e and 0x164e
43 SMSC DME1737 and Asus A8000 (which are the same), SMSC SCH5027, SCH311x,
44 and SCH5127 Super-I/O chips. These chips feature monitoring of 3 temp sensors
45 temp[1-3] (2 remote diodes and 1 internal), 8 voltages in[0-7] (7 external and
46 1 internal) and up to 6 fan speeds fan[1-6]. Additionally, the chips implement
47 up to 5 PWM outputs pwm[1-3,5-6] for controlling fan speeds both manually and
50 For the DME1737, A8000 and SCH5027, fan[1-2] and pwm[1-2] are always present.
51 Fan[3-6] and pwm[3,5-6] are optional features and their availability depends on
53 present during initialization and create the sysfs attributes accordingly.
55 For the SCH311x and SCH5127, fan[1-3] and pwm[1-3] are always present and
56 fan[4-6] and pwm[5-6] don't exist.
58 The hardware monitoring features of the DME1737, A8000, and SCH5027 are only
59 accessible via SMBus, while the SCH311x and SCH5127 only provide access via
61 if it detects a DME1737, A8000, or SCH5027 and as a platform driver if it
68 The voltage inputs are sampled with 12-bit resolution and have internal
70 millivolts and don't need scaling. The voltage inputs are mapped as follows
110 Each voltage input has associated min and max limits which trigger an alarm
117 Temperatures are measured with 12-bit resolution and reported in millidegree
120 scaling by itself and the driver therefore reports true temperatures that don't
128 Each temperature input has associated min and max limits which trigger an alarm
130 returns 1 when a faulty diode or an unconnected input is detected and 0
141 generates. Supported values are 1, 2, and 4. Fan inputs 5-6 only support fans
151 inputs 1-3 and PWM outputs 5-6 are associated with fan inputs 5-6. PWM outputs
164 inputs is static and determined during initialization. These assignments can
168 duty-cycles: full, low, and min. Full is internally hard-wired to 255 (100%)
169 and low and min can be programmed via pwm[1-3]_auto_point1_pwm and
171 programmed via zone[1-3]_auto_point[1-3]_temp and
185 auto_point1_temp and auto_point2_temp. If the temperature drops below the
212 permissions and a short description:
244 					and supports the following values:
255 					full-speed temp, and auto_point3 is the
267 					1, 2, and 4.
295 					This attribute is a bitfield and