Lines Matching refs:volt

189 Sensor  3 CPU core volt
190 Sensor  4 DDR volt
191 Sensor 10 DDR Vtt volt
196 volt and temp sensors, this is motherboard specific. The uGuru however does
200 Volt sensors use a linear scale, a reading 0 corresponds with 0 volt and a
203 in use result in ranges of: 0-4361mV, 0-6248mV or 0-14510mV. 3.3 volt sources
204 use the 0-4361mV range, 5 volt the 0-6248mV and 12 volt the 0-14510mV .
221 Bit 1: Give an alarm if measured volt is over the max threshold		(RW) **
222 Bit 2: Give an alarm if measured volt is under the min threshold	(RW) **
225 Bit 5: 1 if alarm cause measured volt is over the max threshold		(R)
226 Bit 6: 1 if alarm cause measured volt is under the min threshold	(R)
231 ** This bit is only honored/used by the uGuru if a volt sensor is connected