Lines Matching refs:sensors

23 Note: because of the lack of specs only the sensors part of the uGuru is
59 level we will call banks. A bank holds data for one or more sensors. The data
66 See below for all known bank addresses, numbers of sensors in that bank,
167 This bank contains 0 sensors, iow the sensor address is ignored (but must be
185 This bank contains 16 sensors, for each sensor it contains 1 byte.
186 So far the following sensors are known to be available on all motherboards:
196 volt and temp sensors, this is motherboard specific. The uGuru however does
200 Volt sensors use a linear scale, a reading 0 corresponds with 0 volt and a
201 reading of 255 with 3494 mV. The sensors for higher voltages however are
206 Temp sensors also use a linear scale, a reading of 0 corresponds with 0 degree
214 This bank contains 16 sensors, for each sensor it contains 3 bytes. Each
249 This bank contains 3 "sensors", for each sensor it contains 5 bytes.
276 This bank contains 6 sensors (AFAIK), for each sensor it contains 1 byte.
277 So far the following sensors are known to be available on all motherboards:
290 This bank contains 6 sensors (AFAIK), for each sensor it contains 2 bytes.
309 sensors part configured so that it would shutdown my system on any out of spec