Lines Matching refs:holds

37 If DATA holds 0x00 or 0x08 and CMD holds 0x00 or 0xAC an uGuru could be
59 level we will call banks. A bank holds data for one or more sensors. The data
90 first read but sometimes it takes a while before CMD holds 0xAC and thus it
109 Once DATA holds 0x08 again write the sensor address to CMD.
118 DATA holds 0x01 read the byte from CMD.
137 once DATA holds 0x00 write the byte to CMD.
142 Once DATA holds 0x01 read CMD it should hold 0xAC now.
171 This byte holds the alarm flags for sensor 0-7 of Sensor Bank1, with bit 0
175 This byte holds the alarm flags for sensor 8-15 of Sensor Bank1, with bit 0
179 This byte holds the alarm flags for sensor 0-5 of Sensor Bank2, with bit 0
195 This byte holds the reading from the sensor. Sensors in Bank1 can be both
283 This byte holds the reading from the sensor. 0-255 = 0-15300 (linear)