Lines Matching refs:configured
20 non-dedicated pin can be configured as a GPIO; and most chips have at least
36 of pins configured as "output", which is very useful in such "wire-OR"
289 Similarly, other aspects of the GPIO or pin may need to be configured, such as
291 configured prior to gpio_request() being called for those GPIOs, e.g. using
298 Considering in most cases GPIOs are actually configured right after they
328 since GPIOF_INIT_* are only valid when configured as output, so group valid
332 * GPIOF_OUT_INIT_LOW - configured as output, initial level LOW
333 * GPIOF_OUT_INIT_HIGH - configured as output, initial level HIGH
692 is configured as an output, this value may be written;
695 If the pin can be configured as interrupt-generating interrupt
696 and if it has been configured to generate interrupts (see the
709 This file exists only if the pin can be configured as an