Lines Matching refs:you

18  * graphic mode is slower than text mode... but you should not notice
19    if you use same resolution as you used in textmode.
28 If you want, for example, enable a resolution of 1280x1024x24bpp you should
31 You should compile in both vgacon (to boot if you remove you Matrox from
33 unless you have primary display on non-Matrox VBE2.0 device (see 
89 driver is possible, but you must not enable DRI - if you do, resolution and
117 disabled - do not load driver; you can use also `off', but `disabled'
119 enabled  - load driver, if you have `video=matroxfb:disabled' in LILO
120            configuration, you can override it by this (you cannot override
145            it if you have G100 and/or if driver cannot detect memory, you see
176 sgram    - tells to driver that you have Gxx0 with SGRAM memory. It has no
178 sdram    - tells to driver that you have Gxx0 with SDRAM memory.
181            Millennium II. Specify this if you see strange color shadows around
191 hwcursor - enables hardware cursor. It is default. If you are using
220 	   you should set all bits to zero, except lowest bit. This lowest bit
222 	   Default value is now read back from hardware - so you should specify
223 	   this value only if you are also using `init' parameter.
237 If you are not satisfied with videomode selected by `vesa' option, you
261 	   Do not forget that if you want sync on green, you also probably
267 If you know capabilities of your monitor, you can specify some (or all) of
288    with access to /dev/fb* on Alpha can hang machine (you should restrict
295  + If you are using more than one framebuffer device, you must boot kernel
305    frequencies for them. So driver does not check this and allows you to
319  + some check for input values are not so strict how it should be (you can
379    if you have 32MB of videoram, but if you have only 16MB, you may have
389    to change it to TV mode. Also, you must select at least 525 lines for
392  + if you compiled it as module, you must insert i2c-matroxfb, matroxfb_maven
400    if you have 32MB of videoram, but if you have only 16MB, you may have
409  + if you compiled it as module, you must insert matroxfb_g450 and matroxfb_crtc2