Lines Matching refs:use

19    if you use same resolution as you used in textmode.
22 How to use it?
72 (0x100 = 256). You can also use value + 512 to achieve compatibility
115 	   it always probe for memory. Default is to use whole detected
117 disabled - do not load driver; you can use also `off', but `disabled'
122 noaccel  - do not use acceleration engine. It does not work on Alphas.
123 accel    - use acceleration engine. It is default.
134            You should not use this option, some boards then do not restart
140            You should not use this option, some boards then do not restart
144 noinit   - tells driver, that devices were already initialized. You should use
168            You should use sdram or sgram parameter in addition to memtype 
183 noinv24  - use standard timings. It is the default.
190 nohwcursor - disables hardware cursor (use software cursor instead).
217 dfp:X    - use settings X for digital flat panel interface. X is number from
230 	   use matroxset for setting up other devices.
382  + due to hardware limitation, secondary head can use only 16 and 32bpp
385    XFree when secondary head used to use acceleration.
386  + secondary head always powerups in 640x480@60-32 videomode. You have to use
388  + secondary head always powerups in monitor mode. You have to use fbmatroxset
402  + due to hardware limitation, secondary head can use only 16 and 32bpp
405  + secondary head always powerups in 640x480@60-32 videomode. You have to use