Lines Matching refs:it

22 How to use it?
82 XF{68,86}_FBDev should work just fine, but it is non-accelerated. On non-intel
98 mode for console. You can do it at boot time by using videomode
101 Switching to another console and back fixes it. I hope that it is SVGALib's
115 	   it always probe for memory. Default is to use whole detected
120            configuration, you can override it by this (you cannot override
129            it is autodetected for intel's 82437. In this case device does
130 	   not comply to PCI 2.1 specs (it will not guarantee that every
137            enable VGA I/O if BIOS did not it (it is not safe to enable it in
145            it if you have G100 and/or if driver cannot detect memory, you see
148 init     - driver initializes every device it knows about.
199              font data, it must be >= (fontwidth*fontheight*chars_in_font)/8.
202             4bpp, 8bpp). In DIRECTCOLOR modes it is limited to characters
238 can modify it with these options:
292  + interlaced text mode is not supported; it looks like hardware limitation,
309    (and it works with 8bpp on about 320 MHz dotclocks (and changed mclk)).
311    them (maybe that chip overheats, but it has a very big cooler (G100 has
312    none), so it should work).
316  + feature connector of Mystique and Gx00 is set to VGA mode (it is disabled
319  + some check for input values are not so strict how it should be (you can
337 (for 32bpp it is about 3GB of data (exactly 3000 MB); for 8x16 font in 
340 faster, it is kernel-space only time on P-II/350 MHz, Millennium I in 33 MHz
372 * Yes, it is slower than Millennium I.
389    to change it to TV mode. Also, you must select at least 525 lines for
392  + if you compiled it as module, you must insert i2c-matroxfb, matroxfb_maven
409  + if you compiled it as module, you must insert matroxfb_g450 and matroxfb_crtc2