Lines Matching refs:have

33 unless you have primary display on non-Matrox VBE2.0 device (see 
87 XFree servers have big troubles in multihead configurations (even on first
119 enabled  - load driver, if you have `video=matroxfb:disabled' in LILO
145            it if you have G100 and/or if driver cannot detect memory, you see
174            much. It is default. You must have MTRR support enabled in kernel
175 	   and your CPU must have MTRR (f.e. Pentium II have them).
176 sgram    - tells to driver that you have Gxx0 with SGRAM memory. It has no
178 sdram    - tells to driver that you have Gxx0 with SDRAM memory.
209              Millennium I or II, because of these devices have hardware
224 outputs:XYZ - set mapping between CRTC and outputs. Each letter can have value
304    Because I have no access to other devices, I do not know specific
379    if you have 32MB of videoram, but if you have only 16MB, you may have
386  + secondary head always powerups in 640x480@60-32 videomode. You have to use
388  + secondary head always powerups in monitor mode. You have to use fbmatroxset
400    if you have 32MB of videoram, but if you have only 16MB, you may have
405  + secondary head always powerups in 640x480@60-32 videomode. You have to use