Lines Matching refs:X

86 Running another (accelerated) X-Server like XF86_SVGA works too. But (at least)
90 color depth of your X desktop must match resolution and color depths of your
91 virtual consoles, otherwise X will corrupt accelerator settings.
113 mem:X    - size of memory (X can be in megabytes, kilobytes or bytes)
186 dev:X    - bind driver to device X. Driver numbers device from 0 up to N,
198 fastfont:X - enables fastfont feature. X specifies size of memory reserved for
217 dfp:X    - use settings X for digital flat panel interface. X is number from
231 vesa:X   - selects startup videomode. X is number from 0 to 0x1FF, see table
240 xres:X   - horizontal resolution, in pixels. Default is derived from `vesa'
242 yres:X   - vertical resolution, in pixel lines. Default is derived from `vesa'
244 upper:X  - top boundary: lines between end of VSYNC pulse and start of first
246 lower:X  - bottom boundary: lines between end of picture and start of VSYNC
248 vslen:X  - length of VSYNC pulse, in lines. Default is derived from `vesa'
250 left:X   - left boundary: pixels between end of HSYNC pulse and first pixel.
252 right:X  - right boundary: pixels between end of picture and start of HSYNC
254 hslen:X  - length of HSYNC pulse, in pixels. Default is derived from `vesa'
256 pixclock:X - dotclocks, in ps (picoseconds). Default is derived from `vesa'
258 sync:X   - sync. pulse - bit 0 inverts HSYNC polarity, bit 1 VSYNC polarity.
264 depth:X  - Bits per pixel: 0=text, 4,8,15,16,24 or 32. Default depends on
271 maxclk:X - maximum dotclock. X can be specified in MHz, kHz or Hz. Default is
273 fh:X     - maximum horizontal synchronization frequency. X can be specified
275 fv:X     - maximum vertical frequency. X must be specified in Hz. Default is