Lines Matching refs:Default
115 it always probe for memory. Default is to use whole detected
189 Default is `every' known device.
222 Default value is now read back from hardware - so you should specify
227 and third letter to the DVI output. Default setting is 100 for
232 above for detailed explanation. Default is 640x480x8bpp if driver
240 xres:X - horizontal resolution, in pixels. Default is derived from `vesa'
242 yres:X - vertical resolution, in pixel lines. Default is derived from `vesa'
245 pixel line of picture. Default is derived from `vesa' option.
247 pulse. Default is derived from `vesa' option.
248 vslen:X - length of VSYNC pulse, in lines. Default is derived from `vesa'
251 Default is derived from `vesa' option.
253 pulse. Default is derived from `vesa' option.
254 hslen:X - length of HSYNC pulse, in pixels. Default is derived from `vesa'
256 pixclock:X - dotclocks, in ps (picoseconds). Default is derived from `vesa'
263 Default depends on `vesa'.
264 depth:X - Bits per pixel: 0=text, 4,8,15,16,24 or 32. Default depends on
271 maxclk:X - maximum dotclock. X can be specified in MHz, kHz or Hz. Default is
274 in kHz or Hz. Default is `don't care'.
275 fv:X - maximum vertical frequency. X must be specified in Hz. Default is