Lines Matching refs:and

13 - cell-index:       The SSI, <0> = SSI1, <1> = SSI2, and so on.
14 - reg:              Offset and length of the register set for the device.
15 - interrupts:       <a b> where a is the interrupt number and b is a
16                     field that represents an encoding of the sense and
29 - fsl,fifo-depth:   The number of elements in the transmit and receive FIFOs.
33                     mode.  In this mode, pins SRCK, STCK, SRFS, and STFS must
35                     SRCK and SRFS are ignored.  Asynchronous mode allows
36                     playback and capture to use different sample sizes and
37                     sample rates.  Some drivers may require that SRCK and STCK
38                     be connected together, and SRFS and STFS be connected
53 - fsl,fiq-stream-filter: Bool property. Disabled DMA and use FIQ instead to
56 		    on pca100 and pcm043.
59 - dma-names:	    Two dmas have to be defined, "tx" and "rx", if fsl,imx-fiq
72 Notes on fsl,playback-dma and fsl,capture-dma:
75 and capture.  On the MPC8610, for example, SSI1 must use DMA channel 0 for
76 playback and DMA channel 1 for capture.  SSI2 must use DMA channel 2 for
77 playback and DMA channel 3 for capture.  The developer can choose which
82 "fsl,playback-dma" and "fsl,capture-dma" must be marked as compatible with
86 drivers (fsldma) will attempt to use them, and it will conflict with the