Lines Matching refs:dlg

8 - compatible : Should be "dlg,da7219"
31 - dlg,ldo-lvl : Required internal LDO voltage (mV) level for digital engine
33 - dlg,micbias-lvl : Voltage (mV) for Mic Bias
35 - dlg,mic-amp-in-sel : Mic input source type
43 - dlg,micbias-pulse-lvl : Mic bias higher voltage pulse level (mV).
45 - dlg,micbias-pulse-time : Mic bias higher voltage pulse duration (ms)
46 - dlg,btn-cfg : Periodic button press measurements for 4-pole jack (ms)
48 - dlg,mic-det-thr : Impedance threshold for mic detection measurement (Ohms)
50 - dlg,jack-ins-deb : Debounce time for jack insertion (ms)
52 - dlg,jack-det-rate: Jack type detection latency (3/4 pole)
54 - dlg,jack-rem-deb : Debounce time for jack removal (ms)
56 - dlg,a-d-btn-thr : Impedance threshold between buttons A and D
58 - dlg,d-b-btn-thr : Impedance threshold between buttons D and B
60 - dlg,b-c-btn-thr : Impedance threshold between buttons B and C
62 - dlg,c-mic-btn-thr : Impedance threshold between button C and Mic
64 - dlg,btn-avg : Number of 8-bit readings for averaged button measurement
66 - dlg,adc-1bit-rpt : Repeat count for 1-bit button measurement
74 		compatible = "dlg,da7219";
87 		dlg,ldo-lvl = <1200>;
88 		dlg,micbias-lvl = <2600>;
89 		dlg,mic-amp-in-sel = "diff";
92 			dlg,btn-cfg = <50>;
93 			dlg,mic-det-thr = <500>;
94 			dlg,jack-ins-deb = <20>;
95 			dlg,jack-det-rate = "32ms_64ms";
96 			dlg,jack-rem-deb = <1>;
98 			dlg,a-d-btn-thr = <0xa>;
99 			dlg,d-b-btn-thr = <0x16>;
100 			dlg,b-c-btn-thr = <0x21>;
101 			dlg,c-mic-btn-thr = <0x3E>;
103 			dlg,btn-avg = <4>;
104 			dlg,adc-1bit-rpt = <1>;