Lines Matching refs:pmic
7 describes the bindings for 'pmic' sub-block of max8997.
10 - compatible: Should be "maxim,max8997-pmic".
11 - reg: Specifies the i2c slave address of the pmic block. It should be 0x66.
13 - max8997,pmic-buck1-dvs-voltage: A set of 8 voltage values in micro-volt (uV)
17 - max8997,pmic-buck2-dvs-voltage: A set of 8 voltage values in micro-volt (uV)
21 - max8997,pmic-buck5-dvs-voltage: A set of 8 voltage values in micro-volt (uV)
25 [1] If none of the 'max8997,pmic-buck[1/2/5]-uses-gpio-dvs' optional
26 property is specified, the 'max8997,pmic-buck[1/2/5]-dvs-voltage'
30 If either of the 'max8997,pmic-buck[1/2/5]-uses-gpio-dvs' optional
32 'max8997,pmic-buck[1/2/5]-dvs-voltage' should be specified.
40 - max8997,pmic-buck1-uses-gpio-dvs: 'buck1' can be controlled by gpio dvs.
41 - max8997,pmic-buck2-uses-gpio-dvs: 'buck2' can be controlled by gpio dvs.
42 - max8997,pmic-buck5-uses-gpio-dvs: 'buck5' can be controlled by gpio dvs.
45 - max8997,pmic-ignore-gpiodvs-side-effect: When GPIO-DVS mode is used for
50 - max8997,pmic-buck125-default-dvs-idx: Default voltage setting selected from
55 - max8997,pmic-buck125-dvs-gpios: GPIO specifiers for three host gpio's used
66 The following are the names of the regulators that the max8997 pmic block
93 compatible = "maxim,max8997-pmic";
98 max8997,pmic-buck1-uses-gpio-dvs;
99 max8997,pmic-buck2-uses-gpio-dvs;
100 max8997,pmic-buck5-uses-gpio-dvs;
102 max8997,pmic-ignore-gpiodvs-side-effect;
103 max8997,pmic-buck125-default-dvs-idx = <0>;
105 max8997,pmic-buck125-dvs-gpios = <&gpx0 0 1 0 0>, /* SET1 */
109 max8997,pmic-buck1-dvs-voltage = <1350000>, <1300000>,
114 max8997,pmic-buck2-dvs-voltage = <1100000>, <1100000>,
119 max8997,pmic-buck5-dvs-voltage = <1200000>, <1200000>,