Lines Matching refs:dvs

13 - max8997,pmic-buck1-dvs-voltage: A set of 8 voltage values in micro-volt (uV)
14   units for buck1 when changing voltage using gpio dvs. Refer to [1] below
17 - max8997,pmic-buck2-dvs-voltage: A set of 8 voltage values in micro-volt (uV)
18   units for buck2 when changing voltage using gpio dvs. Refer to [1] below
21 - max8997,pmic-buck5-dvs-voltage: A set of 8 voltage values in micro-volt (uV)
22   units for buck5 when changing voltage using gpio dvs. Refer to [1] below
25 [1] If none of the 'max8997,pmic-buck[1/2/5]-uses-gpio-dvs' optional
26     property is specified, the 'max8997,pmic-buck[1/2/5]-dvs-voltage'
30     If either of the 'max8997,pmic-buck[1/2/5]-uses-gpio-dvs' optional
32     'max8997,pmic-buck[1/2/5]-dvs-voltage' should be specified.
40 - max8997,pmic-buck1-uses-gpio-dvs: 'buck1' can be controlled by gpio dvs.
41 - max8997,pmic-buck2-uses-gpio-dvs: 'buck2' can be controlled by gpio dvs.
42 - max8997,pmic-buck5-uses-gpio-dvs: 'buck5' can be controlled by gpio dvs.
50 - max8997,pmic-buck125-default-dvs-idx: Default voltage setting selected from
51   the possible 8 options selectable by the dvs gpios. The value of this
55 - max8997,pmic-buck125-dvs-gpios: GPIO specifiers for three host gpio's used
56   for dvs. The format of the gpio specifier depends in the gpio controller.
98 		max8997,pmic-buck1-uses-gpio-dvs;
99 		max8997,pmic-buck2-uses-gpio-dvs;
100 		max8997,pmic-buck5-uses-gpio-dvs;
103 		max8997,pmic-buck125-default-dvs-idx = <0>;
105 		max8997,pmic-buck125-dvs-gpios = <&gpx0 0 1 0 0>, /* SET1 */
109 		max8997,pmic-buck1-dvs-voltage = <1350000>, <1300000>,
114 		max8997,pmic-buck2-dvs-voltage = <1100000>, <1100000>,
119 		max8997,pmic-buck5-dvs-voltage = <1200000>, <1200000>,