Lines Matching refs:the

7   This node represents the Nintendo Wii video game console.
16   This node represents the multi-function "Hollywood" chip, which packages
17   many of the devices found in the Nintendo Wii.
25   Represents the interface between the graphics processor and a external
31    - reg : should contain the VI registers location and length
32    - interrupts : should contain the VI interrupt
36   Represents the data and control interface between the main processor
42   - reg : should contain the PI registers location and length
46   Represents the "Flipper" interrupt controller within the "Hollywood" chip.
47   The node for the "Flipper" interrupt controller must be placed under
48   the PI node.
58   Represents the digital signal processor interface, designed to offload
64    - reg : should contain the DSP registers location and length
65    - interrupts : should contain the DSP interrupt
69   Represents the interface to the four single bit serial interfaces.
76    - reg : should contain the SI registers location and length
77    - interrupts : should contain the SI interrupt
81   Represents the interface to the external 16-bit stereo digital-to-analog
87    - reg : should contain the AI registers location and length
88    - interrupts : should contain the AI interrupt
92   Represents the multi-channel SPI-like interface.
97    - reg : should contain the EXI registers location and length
98    - interrupts : should contain the EXI interrupt
102   Represent the USB 1.x Open Host Controller Interfaces.
107    - reg : should contain the OHCI registers location and length
108    - interrupts : should contain the OHCI interrupt
112   Represents the USB 2.0 Enhanced Host Controller Interface.
117    - reg : should contain the EHCI registers location and length
118    - interrupts : should contain the EHCI interrupt
122   Represent the Secure Digital Host Controller Interfaces.
127    - reg : should contain the SDHCI registers location and length
128    - interrupts : should contain the SDHCI interrupt
132   Represent the Inter-Processor Communication interface. This interface
133   enables communications between the Broadway and the Starlet processors.
136    - reg : should contain the IPC registers location and length
137    - interrupts : should contain the IPC interrupt
141   Represents the "Hollywood" interrupt controller within the
148   - reg : should contain the controller registers location and length
150   - interrupts : should contain the cascade interrupt of the "flipper" pic
151   - interrupt-parent: should contain the phandle of the "flipper" pic
155   Represents the dual access 32 GPIO controller interface.
161   - reg : should contain the IPC registers location and length
166   Represents the control interface used to setup several miscellaneous
167   settings of the "Hollywood" chip like boot memory mappings, resets,
173    - reg : should contain the control registers location and length
177   Represents the interface used to communicate with mass storage devices.
182    - reg : should contain the DI registers location and length
183    - interrupts : should contain the DI interrupt