Lines Matching refs:should

9 - compatible: should be one of the following.
47   as child nodes of the pin-controller node. There should be atleast one
54   The child node should contain a list of pin(s) on which a particular pin
57   should be atleast one pin specfied for this property and there is no upper
61   as "gpa0-0", "gpa0-1", "gpa0-2" and so on. The names should be in lower case.
62   The format of the pin names should be (as per the hardware manual)
65   The pin function selection that should be applied on the pins listed in the
67   of this property that should be applied to each of the pins listed in the
68   "samsung,pins" property should be picked from the hardware manual of the SoC
75   configuration that should be applied on all the pins listed in the
85   The values specified by these config properties should be derived from the
89   Note: A child should include atleast a pin function selection property or
93   pin configuration should use the bindings listed in the "pinctrl-bindings.txt"
104    following properties should be specified in the pin-controller device node.
115    - #interrupt-cells: the value of this property should be 2.
126    child node representing the external wakeup interrupt controller should be
127    included in the pin-controller device node. This child node should include
150    - #interrupt-cells: the value of this property should be 2
171 All the pin controller nodes should be represented in the aliases node using