Lines Matching refs:in
3 This binding describes the MPP block(s) found in the 8xxx series
46 Please refer to pinctrl-bindings.txt in this directory for details of the
67 The following generic properties as defined in pinctrl-bindings.txt are valid
68 to specify in a pin configuration subnode:
73 Definition: List of MPP pins affected by the properties specified in
98 Valid values are 600, 10000 and 30000 in bidirectional mode
99 only, i.e. when operating in qcom,analog-mode and input and
101 when operating in other modes.
106 Definition: The specified pins will put in high-Z mode and disabled.
111 Definition: The specified pins are put in input mode, i.e. their input
117 Definition: The specified pins are configured in output mode, driven
123 Definition: The specified pins are configured in output mode, driven
130 sources are defined in <dt-bindings/pinctrl/qcom,pmic-mpp.h>
136 defined in <dt-binding/pinctrl/qcom,pmic-mpp.h>
142 Definition: Selects which dtest rail to be routed in the various functions.
149 defined in <dt-bindings/pinctrl/qcom,pmic-mpp.h>
154 Definition: Indicates that the pin should be operating in paired mode.