Lines Matching refs:bits

10 - pinctrl-single,register-width : pinmux register access width in bits
12 - pinctrl-single,function-mask : mask of allowed pinmux function bits
34 		/* input, enabled pullup bits, disabled pullup bits, mask */
40 		/* input, enabled pulldown bits, disabled pulldown bits, mask */
43   * Two bits to control input bias pullup and pulldown: User should use
46   * Three bits to control input bias enable, pullup and pulldown. User should
48     enable bit should be included in pullup or pulldown bits.
63 		/* input, enable bits, disable bits, mask */
94 register offset and value pairs using pinctrl-single,pins. Only the bits
106 pinctrl-single,bits need to be used which takes three parameters:
108 	pinctrl-single,bits = <0xdc 0x18 0xff>;
231 		pinctrl-single,bits = <
237 		pinctrl-single,bits = <