Lines Matching refs:be

5 controllers. Each pin controller must be represented as a node in device tree,
9 designated client devices. Again, each client device must be represented as a
24 Note that pin controllers themselves may also be client devices of themselves.
37 property exists to define the pin configuration. Each state may also be
41 Each client device's own binding determines the set of states that must be
43 IDs that must be provided, or whether to define the set of state names that
44 must be provided.
48 		node. These referenced pin configuration nodes must be child
51 		controllers may be configured, or so that a state may be built
57 		In some cases, it may be useful to define a state, but for it
58 		to be empty. This may be required when a common IP block is
62 		exist, they must still be defined, but may be left empty.
124 The pin configuration nodes need not be direct children of the pin controller
125 device; they may be grandchildren, for example. Whether this is legal, and
136 			  (either this or "pins" must be specified)
138 			  this or "groups" must be specified)
171 			  apply to (either this or "group" has to be
175 			  individual pins (either this or "pins" has to be
235 More in-depth documentation on these parameters can be found in