Lines Matching refs:pin

12 phrase "pin configuration node".
14 Freescale IMX pin configuration node is a node of a group of pins which can be
17 mode) this pin can work on and the 'config' configures various pad settings
24 Required properties for pin configuration node:
26   setting for one pin. The first 5 integers <mux_reg conf_reg input_reg mux_val
29   the pad setting value like pull-up on this pin. And that's why fsl,pins entry
33 NO_PAD_CTL(1 << 31): indicate this pin does not need config.
46 1. We have pin function node defined under iomux controller node to represent
48 2. The pin configuration node intends to work on a specific function should
51    this group of pins in this pin configuration node are working on.
52 3. The driver can use the function node's name and pin configuration node's
53    name describe the pin function and group hierarchy.
55    as the function name and pin configuration node's name as group name to
57 4. Each pin configuration node should have a phandle, devices can set pins
58    configurations by referring to the phandle of that pin configuration node.