Lines Matching refs:OPP

1 Generic OPP (Operating Performance Points) Bindings
10 This document contain multiple versions of OPP binding and only one of them
45 phandle to a OPP table in their DT node. The OPP core will use this phandle to
48 Devices may want to choose OPP tables at runtime and so can provide a list of
51 identify the OPP tables.
58 - operating-points-names: Names of OPP tables (required if multiple OPP
60   for all the CPUs which are sharing clock/voltage rails and hence the OPP
63 * OPP Table Node
72 - OPP nodes: One or more OPP nodes describing voltage-current-frequency
74   reference an OPP.
77 - opp-shared: Indicates that device nodes using this OPP Table Node's phandle
80   but they share OPP tables.
82 - status: Marks the OPP table enabled/disabled.
85 * OPP Node
108   Should only be set if opp-microvolt is set for the OPP.
116   nanoseconds) for switching to this OPP from any other OPP.
118 - turbo-mode: Marks the OPP to be used only for turbo modes. Turbo mode is
123 - opp-suspend: Marks the OPP to be used during device suspend. Only one OPP in
420 Example 5: Multiple OPP tables