Lines Matching refs:nand
6 marvell,pxa3xx-nand
7 marvell,armada370-nand
15 - marvell,nand-enable-arbiter: Set to enable the bus arbiter
16 - marvell,nand-keep-config: Set to keep the NAND controller config as set
19 - nand-on-flash-bbt: boolean to enable on flash bbt option if
21 - nand-ecc-strength: number of bits to correct per ECC step
22 - nand-ecc-step-size: number of data bytes covered by a single ECC step
26 - nand-ecc-strength = <1>, nand-ecc-step-size = <512>
27 - nand-ecc-strength = <4>, nand-ecc-step-size = <512>
28 - nand-ecc-strength = <8>, nand-ecc-step-size = <512>
32 nand0: nand@43100000 {
33 compatible = "marvell,pxa3xx-nand";
40 marvell,nand-enable-arbiter;
41 marvell,nand-keep-config;