Lines Matching refs:ti

11 Davinci DM646x - http://www.ti.com/lit/ug/sprueq7c/sprueq7c.pdf
12 OMAP-L138 (DA850) - http://www.ti.com/lit/ug/spruh77a/spruh77a.pdf
13 Kestone - http://www.ti.com/lit/ug/sprugz3a/sprugz3a.pdf
17 - compatible:		"ti,davinci-aemif"
18 			"ti,keystone-aemif"
19 			"ti,da850-aemif"
57 such as NOR (e.g. cfi-flash) and NAND (ti,davinci-nand, see davinci-nand.txt).
73 - ti,cs-chipselect:	number of chipselect. Indicates on the aemif driver
75 			compatibles "ti,davinci-aemif" and "ti,keystone-aemif"
77 			"ti,da850-aemif" range is [2-5].
81 - ti,cs-bus-width:		width of the asynchronous device's data bus
84 - ti,cs-select-strobe-mode:	enable/disable select strobe mode
89 - ti,cs-extended-wait-mode:	enable/disable extended wait mode
95 - ti,cs-min-turnaround-ns:	minimum turn around time, ns
102 - ti,cs-read-setup-ns:		read setup width, ns
107 - ti,cs-read-strobe-ns:		read strobe width, ns
112 - ti,cs-read-hold-ns:		read hold width, ns
119 - ti,cs-write-setup-ns:		write setup width, ns
124 - ti,cs-write-strobe-ns:	write strobe width, ns
129 - ti,cs-write-hold-ns:		write hold width, ns
142 	compatible = "ti,davinci-aemif";
163 		ti,cs-chipselect = <2>;
165 		ti,cs-min-turnaround-ns = <0>;
166 		ti,cs-read-hold-ns = <7>;
167 		ti,cs-read-strobe-ns = <42>;
168 		ti,cs-read-setup-ns = <14>;
169 		ti,cs-write-hold-ns = <7>;
170 		ti,cs-write-strobe-ns = <42>;
171 		ti,cs-write-setup-ns = <14>;
174 			compatible = "ti,davinci-nand";
192 		ti,cs-chipselect = <0>;
194 		ti,cs-min-turnaround-ns = <0>;
195 		ti,cs-read-hold-ns = <8>;
196 		ti,cs-read-strobe-ns = <40>;
197 		ti,cs-read-setup-ns = <14>;
198 		ti,cs-write-hold-ns = <7>;
199 		ti,cs-write-strobe-ns = <40>;
200 		ti,cs-write-setup-ns = <14>;
201 		ti,cs-bus-width = <16>;