Lines Matching refs:interrupt

13 - interrupts : Should be the port interrupt shared by all 32 pins.
19 - interrupt-controller: Marks the device node as an interrupt controller.
20 - #interrupt-cells : Should be 2.  The first cell is the GPIO number.
49 		interrupt-controller;
50 		#interrupt-cells = <2>;
58 		interrupt-controller;
59 		#interrupt-cells = <2>;
67 		interrupt-controller;
68 		#interrupt-cells = <2>;
76 		interrupt-controller;
77 		#interrupt-cells = <2>;
85 		interrupt-controller;
86 		#interrupt-cells = <2>;