Lines Matching refs:output

9 output on a device.  The length of a clock specifier is defined by the
18 		   with a single clock output and 1 for nodes with multiple
22 clock-output-names: Recommended to be a list of strings of clock output signal
24 		    However, the meaning of clock-output-names is domain
33 		    the provider's clock-output-names property.
39         clock-output-names = "ckil", "ckih";
44   clocks by index. The names should reflect the clock output signal
49 		   identifiers into the clock-output-names array.
57 		clock-output-names = "clka", "clkb";
60 	This ensures we do not have any empty strings in clock-output-names
89 The baud clock is connected to output 1 of the &osc device, and the register
90 clock is connected to output 0 of the &ref.
99         clock-output-names = "osc";
110         clock-output-names = "pll", "pll-switched";
114      * and the high frequency switched PLL output for register
128 * The oscillator is fixed-frequency, and provides one clock output, named "osc".
130   signal generated by the external oscillator, and provides two output signals