Lines Matching refs:drives

99 tape drives with your Smart Array 5xxx controller.
102 time if any tape drives or medium changers are detected.  The driver may
121 Hot plug support for SCSI tape drives
124 Hot plugging of SCSI tape drives is supported, with some caveats.
145 physical SCSI disk drives are NOT presented to the SCSI mid layer.  The 
146 physical SCSI disk drives are controlled directly by the array controller 
149 controller in the same way that we are allowing it to access SCSI tape drives.
151 SCSI error handling for tape drives and medium changers
162 driver as well as a SCSI driver and only the tape drives and medium
167 resetting the device.  Additionally, most tape drives will not oblige 
181 allocate more commands for use by tape drives.  Ordinarily only a few commands
182 (6) are allocated for tape drives because tape drives are slow and
184 act as a RAID controller for disk drives, so the vast majority of commands
186 drives attached to a smart array, the default number of commands may not be
187 enought (for example, if you have 8 tape drives, you could only rewind 6
190 tape drives.  For example: