Lines Matching refs:of

11 should not be referenced outside of arch/arm/kernel/setup.c:setup_arch().
13 There are a lot of parameters listed in there, and they are described
18    This parameter must be set to the page size of the machine, and
23    This is the total number of pages of memory in the system.  If
25    of pages in the system.
44    major/minor number pair of device to mount as the root filesystem.
49    These two together describe the character size of the dummy console,
54    the equivalent character size of your fbcon display.  This then allows
60    This describes the character position of cursor on VGA console, and
76    Number of ADFS/MFM disks.  May be used differently by different
86    Number of pages in each bank of the systems memory (used for RiscPC).
88    is non-contiguous from the processors point of view.
92    Number of pages in VRAM (used on Acorn RiscPC).  This value may also
93    be used by loaders if the size of the video RAM can't be obtained
99    This describes the kernel virtual start address and size of the
104    Start address in sectors of the ramdisk image on a floppy disk.
117    The speed of the external oscillator to the 21285 (footbridge),
118    which control's the speed of the memory bus, timer & serial port.
119    Depending upon the speed of the cpu its value can be between
120    0-66 MHz. If no params are passed or a value of zero is passed,
121    then a value of 50 Mhz is the default on 21285 architectures.