Lines Matching refs:an

69 When a PCI-E AER error is captured, an error message will be outputted to
71 Otherwise, it is printed as an error. So users could choose different
74 Below shows an example:
110 When AER is enabled, a PCI Express device will automatically send an
112 an error. The Root Port, upon receiving an error reporting message,
118 Error Command Register, the Root Port generates an interrupt if an
177 If an error message indicates a non-fatal error, performing link reset
182 If Upstream port A captures an AER error, the hierarchy consists of
189 If an error message indicates a fatal error, kernel will broadcast
195 component has an aer driver. If it has, kernel uses the reset_link
209 messages to root port when an error is detected. Note that devices
215 messages to root port when an error is detected.
223 Q: What happens if a PCI Express device driver does not provide an
230 Q: What happens if an upstream port service driver does not provide
240 driver when an error happens. But if the driver is not aware of