Lines Matching refs:to
11 to the EHCI controller; when a full- or low-speed device
12 is plugged in, the connection is routed to the companion
15 Sometimes you want to force a high-speed device to connect
17 connection to be routed to the companion controller.
18 That's what this file does. Writing a port number to the
19 file causes connections on that port to be routed to the
21 number returns the port to normal operation.
23 For example: To force the high-speed device attached to
24 port 4 on bus 2 to run at full speed:
28 To return the port to high-speed operation:
33 to the companion controller.
37 may be attached directly to a "rate-matching hub". This
39 cannot be used to force a port on a high-speed hub to