347 		dev_dbg(&port->dev, "%s - Unable to send config request, request=0x%x size=%d result=%d\n",  in cp210x_get_config()
400 		dev_dbg(&port->dev, "%s - Unable to send request, request=0x%x size=%d result=%d\n",  in cp210x_set_config()
527 	dev_dbg(dev, "%s - baud rate = %d\n", __func__, baud);  in cp210x_get_termios_port()
536 		dev_dbg(dev, "%s - data bits = 5\n", __func__);  in cp210x_get_termios_port()
540 		dev_dbg(dev, "%s - data bits = 6\n", __func__);  in cp210x_get_termios_port()
544 		dev_dbg(dev, "%s - data bits = 7\n", __func__);  in cp210x_get_termios_port()
548 		dev_dbg(dev, "%s - data bits = 8\n", __func__);  in cp210x_get_termios_port()
552 		dev_dbg(dev, "%s - data bits = 9 (not supported, using 8 data bits)\n", __func__);  in cp210x_get_termios_port()
559 		dev_dbg(dev, "%s - Unknown number of data bits, using 8\n", __func__);  in cp210x_get_termios_port()
569 		dev_dbg(dev, "%s - parity = NONE\n", __func__);  in cp210x_get_termios_port()
573 		dev_dbg(dev, "%s - parity = ODD\n", __func__);  in cp210x_get_termios_port()
577 		dev_dbg(dev, "%s - parity = EVEN\n", __func__);  in cp210x_get_termios_port()
582 		dev_dbg(dev, "%s - parity = MARK\n", __func__);  in cp210x_get_termios_port()
586 		dev_dbg(dev, "%s - parity = SPACE\n", __func__);  in cp210x_get_termios_port()
591 		dev_dbg(dev, "%s - Unknown parity mode, disabling parity\n", __func__);  in cp210x_get_termios_port()
601 		dev_dbg(dev, "%s - stop bits = 1\n", __func__);  in cp210x_get_termios_port()
604 		dev_dbg(dev, "%s - stop bits = 1.5 (not supported, using 1 stop bit)\n", __func__);  in cp210x_get_termios_port()
609 		dev_dbg(dev, "%s - stop bits = 2\n", __func__);  in cp210x_get_termios_port()
613 		dev_dbg(dev, "%s - Unknown number of stop bits, using 1 stop bit\n", __func__);  in cp210x_get_termios_port()
621 		dev_dbg(dev, "%s - flow control = CRTSCTS\n", __func__);  in cp210x_get_termios_port()
624 		dev_dbg(dev, "%s - flow control = NONE\n", __func__);  in cp210x_get_termios_port()
671 	dev_dbg(&port->dev, "%s - setting baud rate to %u\n", __func__, baud);  in cp210x_change_speed()
705 			dev_dbg(dev, "%s - data bits = 5\n", __func__);  in cp210x_set_termios()
709 			dev_dbg(dev, "%s - data bits = 6\n", __func__);  in cp210x_set_termios()
713 			dev_dbg(dev, "%s - data bits = 7\n", __func__);  in cp210x_set_termios()
717 			dev_dbg(dev, "%s - data bits = 8\n", __func__);  in cp210x_set_termios()
724 			dev_dbg(dev, "cp210x driver does not support the number of bits requested, using 8 bit mode\n");  in cp210x_set_termios()
729 			dev_dbg(dev, "Number of data bits requested not supported by device\n");  in cp210x_set_termios()
740 					dev_dbg(dev, "%s - parity = MARK\n", __func__);  in cp210x_set_termios()
743 					dev_dbg(dev, "%s - parity = SPACE\n", __func__);  in cp210x_set_termios()
748 					dev_dbg(dev, "%s - parity = ODD\n", __func__);  in cp210x_set_termios()
751 					dev_dbg(dev, "%s - parity = EVEN\n", __func__);  in cp210x_set_termios()
756 			dev_dbg(dev, "Parity mode not supported by device\n");  in cp210x_set_termios()
764 			dev_dbg(dev, "%s - stop bits = 2\n", __func__);  in cp210x_set_termios()
767 			dev_dbg(dev, "%s - stop bits = 1\n", __func__);  in cp210x_set_termios()
770 			dev_dbg(dev, "Number of stop bits requested not supported by device\n");  in cp210x_set_termios()
775 		dev_dbg(dev, "%s - read modem controls = 0x%.4x 0x%.4x 0x%.4x 0x%.4x\n",  in cp210x_set_termios()
783 			dev_dbg(dev, "%s - flow control = CRTSCTS\n", __func__);  in cp210x_set_termios()
788 			dev_dbg(dev, "%s - flow control = NONE\n", __func__);  in cp210x_set_termios()
791 		dev_dbg(dev, "%s - write modem controls = 0x%.4x 0x%.4x 0x%.4x 0x%.4x\n",  in cp210x_set_termios()
828 	dev_dbg(&port->dev, "%s - control = 0x%.4x\n", __func__, control);  in cp210x_tiocmset_port()
856 	dev_dbg(&port->dev, "%s - control = 0x%.2x\n", __func__, control);  in cp210x_tiocmget()
870 	dev_dbg(&port->dev, "%s - turning break %s\n", __func__,  in cp210x_break_ctl()