Lines Matching refs:controller
12 Enable this option to support this chip in host controller mode.
22 "SuperSpeed" host controller hardware.
42 Say 'Y' to enable the support for the xHCI host controller
50 Say 'Y' to enable the support for the xHCI host controller
59 "high speed" (480 Mbit/sec, 60 Mbyte/sec) host controller hardware.
60 If your USB host controller supports USB 2.0, you will likely want to
66 connect to a companion controller. If you configure EHCI, you should
82 controller is needed. It's safe to say "y" even if your
83 controller doesn't support this feature.
119 tristate "EHCI support for on-chip PMC MSP71xx USB controller"
125 Enables support for the onchip USB controller on the PMC_MSP7100 Family SoC's.
129 bool "Use Xilinx usb host EHCI controller core"
134 Xilinx xps USB host controller core is EHCI compliant and has
140 bool "Support for Freescale PPC on-chip EHCI USB controller"
148 tristate "Support for Freescale i.MX on-chip EHCI USB controller"
160 Enables support for the on-chip EHCI controller on
164 tristate "Support for Marvell EBU on-chip EHCI USB controller"
168 Enables support for the on-chip EHCI controller on Marvell's
172 Marvell PXA/MMP USB controller" for those.
175 tristate "Support for ST SPEAr on-chip EHCI USB controller"
179 Enables support for the on-chip EHCI controller on
183 tristate "Support for ST STiHxxx on-chip EHCI USB controller"
188 Enable support for the on-chip EHCI controller found on
192 tristate "Support for Atmel on-chip EHCI USB controller"
196 Enables support for the on-chip EHCI controller on
200 tristate "Support for Qualcomm QSD/MSM on-chip EHCI USB controller"
204 Enables support for the USB Host controller present on the
221 bool "EHCI support for PPC USB controller on OF platform bus"
225 Enables support for the USB controller present on the PowerPC
229 bool "EHCI support for SuperH USB controller"
232 Enables support for the on-chip EHCI controller on the SuperH.
233 If you use the PCI EHCI controller, this option is not necessary.
239 Enable support for the Samsung Exynos SOC's on-chip EHCI controller.
242 bool "EHCI support for Marvell PXA/MMP USB controller"
247 USB SPH and OTG controller. SPH is a single port host, and it can
248 only be EHCI host. OTG is controller that can switch to host mode.
250 controller used by the EBU-type SoCs including Orion, Kirkwood,
252 on-chip EHCI USB controller" for those.
258 Enables support for the W90X900 USB controller
268 Enable support for the CNS3XXX SOC's on-chip EHCI controller.
282 Enables support for the built-in EHCI controller present
305 controller. It is needed for high-speed (480Mbit/sec)
314 The OXU210HP is an USB host/OTG/device controller. Enable this
337 Supports the Philips ISP1362 chip as a host controller
358 Faraday FOTG210 is an OTG controller which can be configured as
380 USB 1.1 host controller hardware. It does more in hardware than Intel's
381 UHCI specification. If your USB host controller follows the OHCI spec,
383 USB controller from Intel or VIA, this is appropriate. If your host
384 controller doesn't use PCI, this is probably appropriate. For a PCI
386 right "prog-if" for your USB controller(s): EHCI, OHCI, or UHCI.
399 Enables support for the OHCI controller on OMAP1/2 chips.
402 tristate "Support for ST SPEAr on-chip OHCI USB controller"
406 Enables support for the on-chip OHCI controller on
410 tristate "Support for ST STiHxxx on-chip OHCI USB controller"
415 Enable support for the on-chip OHCI controller found on
423 Enables support for the on-chip OHCI controller on
427 tristate "Support for LPC on-chip OHCI USB controller"
432 Enables support for the on-chip OHCI controller on
436 tristate "Support for PXA27X/PXA3XX on-chip OHCI USB controller"
440 Enables support for the on-chip OHCI controller on
444 tristate "Support for Atmel on-chip OHCI USB controller"
448 Enables support for the on-chip OHCI controller on
456 Enables support for the on-chip OHCI controller on
466 controller. This driver cannot currently be a loadable
478 Enables support for the built-in OHCI controller present on the
509 Enables support for PCI-bus plug-in USB controller cards.
531 bool "OHCI support for SuperH USB controller (DEPRECATED)"
538 Enables support for the on-chip OHCI controller on the SuperH.
539 If you use the PCI OHCI controller, this option is not necessary.
545 Enable support for the Samsung Exynos SOC's on-chip OHCI controller.
555 Enable support for the CNS3XXX SOC's on-chip OHCI controller.
579 controller. It is needed for low-speed USB 1.0 device
590 host controller). If your USB host controller conforms to this
595 133) and LEON/GRLIB SoCs with the GRUSBHC controller.
639 for PC cards that contain an OHCI host controller. Typical PC cards
642 controller.
650 controller driver that talks to the OHCI controller within the
664 The SL811HS is a single-port USB controller that supports either
666 board has this chip, and you want to use it as a host controller.
695 The R8A66597 is a USB 2.0 host and peripheral controller.
698 to use it as a host controller. If unsure, say N.
707 The Renesas USBHS is a USB 2.0 host and peripheral controller.
710 to use it as a host controller. If unsure, say N.
757 Enable support for the EHCI and OCHI host controller on an bcma bus.
769 Enable support for the EHCI and OCHI host controller on an bcma bus.
779 supported by the host controller drivers.
782 (EHSET) for EHCI host controller hardware, specifically the "Single