Lines Matching refs:USB
2 # USB Host Controller Drivers
4 comment "USB Host Controller Drivers"
10 host/peripheral/OTG USB controllers.
19 tristate "xHCI HCD (USB 3.0) support"
21 The eXtensible Host Controller Interface (xHCI) is standard for USB 3.0
56 tristate "EHCI HCD (USB 2.0) support"
58 The Enhanced Host Controller Interface (EHCI) is standard for USB 2.0
60 If your USB host controller supports USB 2.0, you will likely want to
64 or UHCI) to handle USB 1.1 devices connected to root hub ports. Ports
67 probably configure the OHCI (for NEC and some other vendors) USB Host
95 (TT) in USB 2.0 hubs. Without this, only one transfer will be
100 highspeed USB hub which is connected to a highspeed USB Host
119 tristate "EHCI support for on-chip PMC MSP71xx USB controller"
125 Enables support for the onchip USB controller on the PMC_MSP7100 Family SoC's.
134 Xilinx xps USB host controller core is EHCI compliant and has
140 bool "Support for Freescale PPC on-chip EHCI USB controller"
145 Variation of ARC USB block used in some Freescale chips.
148 tristate "Support for Freescale i.MX on-chip EHCI USB controller"
152 Variation of ARC USB block used in some Freescale chips.
164 tristate "Support for Marvell EBU on-chip EHCI USB controller"
172 Marvell PXA/MMP USB controller" for those.
175 tristate "Support for ST SPEAr on-chip EHCI USB controller"
183 tristate "Support for ST STiHxxx on-chip EHCI USB controller"
192 tristate "Support for Atmel on-chip EHCI USB controller"
200 tristate "Support for Qualcomm QSD/MSM on-chip EHCI USB controller"
204 Enables support for the USB Host controller present on the
217 This driver enables support for the internal USB Host Controllers
221 bool "EHCI support for PPC USB controller on OF platform bus"
225 Enables support for the USB controller present on the PowerPC
229 bool "EHCI support for SuperH USB controller"
242 bool "EHCI support for Marvell PXA/MMP USB controller"
247 USB SPH and OTG controller. SPH is a single port host, and it can
252 on-chip EHCI USB controller" for those.
258 Enables support for the W90X900 USB controller
269 It is needed for high-speed (480Mbit/sec) USB 2.0 device
306 USB 2.0 device support. All CN6XXX based chips with USB are
314 The OXU210HP is an USB host/OTG/device controller. Enable this
318 implement OTG nor USB device controllers.
326 The ISP1160 and ISP1161 chips are USB host controllers. Enable this
346 depends on USB
356 depends on USB
366 tristate "MAX3421 HCD (USB-over-SPI) support"
367 depends on USB && SPI
369 The Maxim MAX3421E chip supports standard USB 2.0-compliant
377 tristate "OHCI HCD (USB 1.1) support"
380 USB 1.1 host controller hardware. It does more in hardware than Intel's
381 UHCI specification. If your USB host controller follows the OHCI spec,
383 USB controller from Intel or VIA, this is appropriate. If your host
386 right "prog-if" for your USB controller(s): EHCI, OHCI, or UHCI.
402 tristate "Support for ST SPEAr on-chip OHCI USB controller"
410 tristate "Support for ST STiHxxx on-chip OHCI USB controller"
427 tristate "Support for LPC on-chip OHCI USB controller"
436 tristate "Support for PXA27X/PXA3XX on-chip OHCI USB controller"
444 tristate "Support for Atmel on-chip OHCI USB controller"
470 bool "USB OHCI support for the Atheros AR71XX/AR7240 SoCs (DEPRECATED)"
487 Enables support for big-endian USB controllers present on the
495 Enables support for little-endian USB controllers present on the
504 tristate "OHCI support for PCI-bus USB controllers"
509 Enables support for PCI-bus plug-in USB controller cards.
523 Broadcom USB OHCI core.
531 bool "OHCI support for SuperH USB controller (DEPRECATED)"
556 It is needed for low-speed USB 1.0 device support.
579 controller. It is needed for low-speed USB 1.0 device
580 support. All CN6XXX based chips with USB are supported.
589 accessing the USB hardware in the PC (which is also called the USB
590 host controller). If your USB host controller conforms to this
618 tristate "Freescale QE USB Host Controller support"
623 This driver enables support for Freescale QE USB Host Controller
625 Full and Low Speed USB.
628 bool "Freescale QE USB Host Controller debug support"
638 The U132 adapter is a USB to CardBus adapter specifically designed
648 USB client driver that interfaces to the FTDI chip within ELAN's
649 USB-to-PCMCIA adapter, and this "u132-hcd" module is a USB host
653 This driver has been tested with a CardBus OHCI USB adapter, and
654 worked with a USB PEN Drive inserted into the first USB port of
664 The SL811HS is a single-port USB controller that supports either
695 The R8A66597 is a USB 2.0 host and peripheral controller.
707 The Renesas USBHS is a USB 2.0 host and peripheral controller.
716 tristate "Wireless USB Host Controller Interface (WHCI) driver"
717 depends on PCI && USB && UWB
721 A driver for PCI-based Wireless USB Host Controllers that are
729 depends on USB && UWB
733 This driver enables you to connect Wireless USB devices to
734 your system using a Host Wire Adaptor USB dongle. This is an
736 your machine via USB (specified in WUSB1.0).
745 This driver enables support for the on-chip USB host in the
784 or embedded hosts that need to undergo USB-IF compliance testing with
789 their USB hardware designs. It is not needed for normal use. If