Lines Matching refs:driver

4 #    (b) the gadget driver using it.
41 	   Say "y" to link the driver statically, or "m" to build a
52 	   Say "y" to link the driver statically, or "m" to build a
71 	   Say "y" to link the driver statically, or "m" to build a
85 	   Say "y" to link the driver statically, or "m" to build a
93 	   Faraday usb device controller FUSB300 driver
100 	   high speed or full speed USB device. This driver supppors
103 	   Say "y" to link the driver statically, or "m" to build a
120 	   endpoints (plus endpoint zero).  This driver supports the
124 	   Say "y" to link the driver statically, or "m" to build a
139 	   Say "y" to link the driver statically, or "m" to build a
143 # if there's only one gadget driver, using only two bulk endpoints,
161 	   Say "y" to link the driver statically, or "m" to build a
173 	   Say "y" to link the driver statically, or "m" to build a
186 	   Say "y" to link the driver statically, or "m" to build a
198 	  This driver has been tested on the S3C2410, S3C2412, and
213 	  This driver has been tested on S3C2416 and S3C2450 processors.
241 	   Say "y" to link the driver statically, or "m" to build a
261 	   Say "y" to link the driver statically, or "m" to build a
271 	   programmable endpoints. This driver supports the
275 	   Set CONFIG_USB_GADGET to "m" to build this driver as a
286 	  Say "y" to link the driver statically, or "m" to build a
296 	  driver itself.
298 	  If unsure, say "N" here.  The driver works fine in PIO mode.
319 	   Say "y" to link the driver statically, or "m" to build a
333 	   Say "y" to link the driver statically, or "m" to build a
341 	  This is a USB device driver for EG20T PCH.
346 	  This driver enables USB device function.
349 	  This driver supports both control transfer and bulk transfer modes.
350 	  This driver dose not support interrupt transfer or isochronous
353 	  This driver also can be used for LAPIS Semiconductor's ML7213 which is
359 	  This driver can be used with Intel's Quark X1000 SOC platform
366 	  USB peripheral controller driver for Xilinx USB2 device.
372 	  Say "y" to link the driver statically, or "m" to build a
384 	  This host controller driver emulates USB, looping all data transfer
385 	  requests back to a USB "gadget driver" in the same host.  The host
390 	  This may help in some stages of creating a driver to embed in a
392 	  driver without its hardware or drivers being involved.
394 	  Since such a gadget side driver needs to interoperate with a host
395 	  side Linux-USB device driver, this may help to debug both sides
398 	  Say "y" to link the driver statically, or "m" to build a