188 static inline void serial_out(struct uart_omap_port *up, int offset, int value)  in serial_out()  function
196 	serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO);  in serial_omap_clear_fifos()
197 	serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO |  in serial_omap_clear_fifos()
199 	serial_out(up, UART_FCR, 0);  in serial_omap_clear_fifos()
305 	serial_out(up, UART_IER, up->ier);  in serial_omap_enable_ms()
328 			serial_out(up, UART_OMAP_SCR, up->scr);  in serial_omap_stop_tx()
347 			serial_out(up, UART_OMAP_SCR, up->scr);  in serial_omap_stop_tx()
354 		serial_out(up, UART_IER, up->ier);  in serial_omap_stop_tx()
363 		serial_out(up, UART_FCR, up->fcr | UART_FCR_CLEAR_RCVR);  in serial_omap_stop_tx()
367 		serial_out(up, UART_IER, up->ier);  in serial_omap_stop_tx()
381 	serial_out(up, UART_IER, up->ier);  in serial_omap_stop_rx()
392 		serial_out(up, UART_TX, up->port.x_char);  in transmit_chars()
403 		serial_out(up, UART_TX, xmit->buf[xmit->tail]);  in transmit_chars()
421 		serial_out(up, UART_IER, up->ier);  in serial_omap_enable_ier_thri()
436 		serial_out(up, UART_OMAP_SCR, up->scr);  in serial_omap_start_tx()
464 	serial_out(up, UART_IER, up->ier);  in serial_omap_throttle()
478 	serial_out(up, UART_IER, up->ier);  in serial_omap_unthrottle()
703 	serial_out(up, UART_MCR, up->mcr);  in serial_omap_set_mctrl()
707 	serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);  in serial_omap_set_mctrl()
712 	serial_out(up, UART_EFR, up->efr);  in serial_omap_set_mctrl()
713 	serial_out(up, UART_LCR, lcr);  in serial_omap_set_mctrl()
731 	serial_out(up, UART_LCR, up->lcr);  in serial_omap_break_ctl()
783 	serial_out(up, UART_LCR, UART_LCR_WLEN8);  in serial_omap_startup()
799 	serial_out(up, UART_IER, up->ier);  in serial_omap_startup()
806 	serial_out(up, UART_OMAP_WER, up->wer);  in serial_omap_startup()
826 	serial_out(up, UART_IER, 0);  in serial_omap_shutdown()
836 	serial_out(up, UART_LCR, serial_in(up, UART_LCR) & ~UART_LCR_SBC);  in serial_omap_shutdown()
959 	serial_out(up, UART_IER, up->ier);  in serial_omap_set_termios()
960 	serial_out(up, UART_LCR, cval);		/* reset DLAB */  in serial_omap_set_termios()
970 	serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A);  in serial_omap_set_termios()
971 	serial_out(up, UART_DLL, 0);  in serial_omap_set_termios()
972 	serial_out(up, UART_DLM, 0);  in serial_omap_set_termios()
973 	serial_out(up, UART_LCR, 0);  in serial_omap_set_termios()
975 	serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);  in serial_omap_set_termios()
979 	serial_out(up, UART_EFR, up->efr | UART_EFR_ECB);  in serial_omap_set_termios()
981 	serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A);  in serial_omap_set_termios()
983 	serial_out(up, UART_MCR, up->mcr | UART_MCR_TCRTLR);  in serial_omap_set_termios()
1005 	serial_out(up, UART_FCR, up->fcr);  in serial_omap_set_termios()
1006 	serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);  in serial_omap_set_termios()
1008 	serial_out(up, UART_OMAP_SCR, up->scr);  in serial_omap_set_termios()
1011 	serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A);  in serial_omap_set_termios()
1012 	serial_out(up, UART_MCR, up->mcr);  in serial_omap_set_termios()
1013 	serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);  in serial_omap_set_termios()
1014 	serial_out(up, UART_EFR, up->efr);  in serial_omap_set_termios()
1015 	serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A);  in serial_omap_set_termios()
1022 		serial_out(up, UART_OMAP_MDR1, up->mdr1);  in serial_omap_set_termios()
1024 	serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);  in serial_omap_set_termios()
1025 	serial_out(up, UART_EFR, up->efr | UART_EFR_ECB);  in serial_omap_set_termios()
1027 	serial_out(up, UART_LCR, 0);  in serial_omap_set_termios()
1028 	serial_out(up, UART_IER, 0);  in serial_omap_set_termios()
1029 	serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);  in serial_omap_set_termios()
1031 	serial_out(up, UART_DLL, up->dll);	/* LS of divisor */  in serial_omap_set_termios()
1032 	serial_out(up, UART_DLM, up->dlh);	/* MS of divisor */  in serial_omap_set_termios()
1034 	serial_out(up, UART_LCR, 0);  in serial_omap_set_termios()
1035 	serial_out(up, UART_IER, up->ier);  in serial_omap_set_termios()
1036 	serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);  in serial_omap_set_termios()
1038 	serial_out(up, UART_EFR, up->efr);  in serial_omap_set_termios()
1039 	serial_out(up, UART_LCR, cval);  in serial_omap_set_termios()
1049 		serial_out(up, UART_OMAP_MDR1, up->mdr1);  in serial_omap_set_termios()
1052 	serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);  in serial_omap_set_termios()
1055 	serial_out(up, UART_XON1, termios->c_cc[VSTART]);  in serial_omap_set_termios()
1056 	serial_out(up, UART_XOFF1, termios->c_cc[VSTOP]);  in serial_omap_set_termios()
1059 	serial_out(up, UART_EFR, up->efr | UART_EFR_ECB);  in serial_omap_set_termios()
1060 	serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A);  in serial_omap_set_termios()
1061 	serial_out(up, UART_MCR, up->mcr | UART_MCR_TCRTLR);  in serial_omap_set_termios()
1063 	serial_out(up, UART_TI752_TCR, OMAP_UART_TCR_TRIG);  in serial_omap_set_termios()
1109 	serial_out(up, UART_MCR, up->mcr);  in serial_omap_set_termios()
1110 	serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);  in serial_omap_set_termios()
1111 	serial_out(up, UART_EFR, up->efr);  in serial_omap_set_termios()
1112 	serial_out(up, UART_LCR, up->lcr);  in serial_omap_set_termios()
1132 	serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);  in serial_omap_pm()
1134 	serial_out(up, UART_EFR, efr | UART_EFR_ECB);  in serial_omap_pm()
1135 	serial_out(up, UART_LCR, 0);  in serial_omap_pm()
1137 	serial_out(up, UART_IER, (state != 0) ? UART_IERX_SLEEP : 0);  in serial_omap_pm()
1138 	serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);  in serial_omap_pm()
1139 	serial_out(up, UART_EFR, efr);  in serial_omap_pm()
1140 	serial_out(up, UART_LCR, 0);  in serial_omap_pm()
1232 	serial_out(up, UART_TX, ch);  in serial_omap_poll_put_char()
1271 	serial_out(up, UART_TX, ch);  in serial_omap_console_putchar()
1297 	serial_out(up, UART_IER, 0);  in serial_omap_console_write()
1306 	serial_out(up, UART_IER, ier);  in serial_omap_console_write()
1382 	serial_out(up, UART_IER, 0);  in serial_omap_config_rs485()
1406 	serial_out(up, UART_IER, up->ier);  in serial_omap_config_rs485()
1414 		serial_out(up, UART_OMAP_SCR, up->scr);  in serial_omap_config_rs485()
1775 	serial_out(up, UART_OMAP_MDR1, mdr1);  in serial_omap_mdr1_errataset()
1777 	serial_out(up, UART_FCR, up->fcr | UART_FCR_CLEAR_XMIT |  in serial_omap_mdr1_errataset()
1802 		serial_out(up, UART_OMAP_MDR1, UART_OMAP_MDR1_DISABLE);  in serial_omap_restore_context()
1804 	serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); /* Config B mode */  in serial_omap_restore_context()
1805 	serial_out(up, UART_EFR, UART_EFR_ECB);  in serial_omap_restore_context()
1806 	serial_out(up, UART_LCR, 0x0); /* Operational mode */  in serial_omap_restore_context()
1807 	serial_out(up, UART_IER, 0x0);  in serial_omap_restore_context()
1808 	serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); /* Config B mode */  in serial_omap_restore_context()
1809 	serial_out(up, UART_DLL, up->dll);  in serial_omap_restore_context()
1810 	serial_out(up, UART_DLM, up->dlh);  in serial_omap_restore_context()
1811 	serial_out(up, UART_LCR, 0x0); /* Operational mode */  in serial_omap_restore_context()
1812 	serial_out(up, UART_IER, up->ier);  in serial_omap_restore_context()
1813 	serial_out(up, UART_FCR, up->fcr);  in serial_omap_restore_context()
1814 	serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A);  in serial_omap_restore_context()
1815 	serial_out(up, UART_MCR, up->mcr);  in serial_omap_restore_context()
1816 	serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); /* Config B mode */  in serial_omap_restore_context()
1817 	serial_out(up, UART_OMAP_SCR, up->scr);  in serial_omap_restore_context()
1818 	serial_out(up, UART_EFR, up->efr);  in serial_omap_restore_context()
1819 	serial_out(up, UART_LCR, up->lcr);  in serial_omap_restore_context()
1823 		serial_out(up, UART_OMAP_MDR1, up->mdr1);  in serial_omap_restore_context()
1824 	serial_out(up, UART_OMAP_WER, up->wer);  in serial_omap_restore_context()