Lines Matching refs:serial
14 the console before standard serial driver is probed. The console is
17 source "drivers/tty/serial/8250/Kconfig"
19 comment "Non-8250 serial port support"
22 tristate "ARM AMBA PL010 serial port support"
33 bool "Support for console on AMBA serial port"
49 tristate "ARM AMBA PL011 serial port support"
60 bool "Support for console on AMBA serial port"
84 the console before standard serial driver is probed. This is enabled
89 tristate "BCM1xxx on-chip DUART serial support"
94 Support for the asynchronous serial interface (DUART) included in
104 bool "Support for console on a BCM1xxx DUART serial port"
109 If you say Y here, it will be possible to use a serial port as the
117 bool "AT91 / AT32 on-chip serial port support"
126 bool "Support for console on AT91 / AT32 serial port"
136 bool "Support DMA transfers on AT91 / AT32 serial port"
141 and from the Atmel AT91 / AT32 serial port. In order to
159 The ttySn nodes are legally reserved for the 8250 serial driver
160 but are often misused by other serial drivers.
187 bool "Micrel KS8695 (Centaur) serial port support"
194 bool "Support for console on KS8695 (Centaur) serial port"
204 tristate "Meson serial port support"
222 tristate "CLPS711X serial port support"
231 bool "Support for console on CLPS711X serial port"
241 tristate "Samsung SoC serial support"
247 provide all of these ports, depending on how the serial port
264 serial driver
267 bool "Samsung SoC serial debug"
270 Add support for debugging the serial driver. Since this is
276 bool "Support for console on Samsung SoC serial port"
281 Allow selection of the S3C24XX on-board serial ports for use as
298 provide all of these ports, depending on how the serial port
302 bool "Support for console on SiRF SoC serial port"
314 tristate "NVIDIA Tegra20/30 SoC serial controller"
320 provide all of these ports, depending on how the serial port
346 bool "DECstation DZ serial driver"
351 DZ11-family serial controllers for DECstations and VAXstations,
355 bool "Support console on DECstation DZ serial driver"
360 If you say Y here, it will be possible to use a serial port as the
365 Note that the firmware uses ttyS3 as the serial console on
371 tristate "DECstation Z85C30 serial support"
376 Support for the Zilog 85C350 serial communications controller used
377 for serial ports in newer DECstation systems. These include the
385 bool "Support for console on a DECstation Z85C30 serial port"
390 If you say Y here, it will be possible to use a serial port as the
395 Note that the firmware uses ttyS1 as the serial console on the
401 tristate "DC21285 serial port support"
406 PCI bridge you can enable its onboard serial port by enabling this
410 bool "Console on DC21285 serial port"
414 If you have enabled the serial port on the 21285 footbridge you can
425 bool "Marvell MPSC serial port support"
429 Say Y here if you want to use the Marvell MPSC serial controller.
432 bool "Support for console on Marvell MPSC serial port"
436 Say Y here if you want to support a serial console on a Marvell MPSC.
439 bool "PXA serial port support"
444 can enable its onboard serial ports by enabling this option.
447 bool "Console on PXA serial port"
451 If you have enabled the serial port on the Intel XScale PXA
462 bool "SA1100 serial port support"
467 can enable its onboard serial port by enabling this option.
472 bool "Console on SA1100 serial port"
476 If you have enabled the serial port on the SA1100/SA1110 StrongARM
487 tristate "Blackfin serial port support"
498 bool "Console on Blackfin serial port"
507 This driver supports the built-in serial ports of the Blackfin family
573 tristate "IMX serial port support"
579 can enable its onboard serial port by enabling this option.
582 bool "Console on IMX serial port"
586 If you have enabled the serial port on the Freescale IMX
596 tristate "Xilinx uartlite serial port support"
600 Say Y here if you want to use the Xilinx uartlite serial controller.
606 bool "Support for console on Xilinx uartlite serial port"
622 tristate "Sun Zilog8530 serial support"
625 This driver supports the Zilog8530 serial ports found on many Sparc
626 systems. Say Y or M if you want to be able to these serial ports.
629 bool "Console on Sun Zilog8530 serial port"
632 If you would like to be able to use the Zilog8530 serial port
637 tristate "Sun SU serial support"
640 This driver supports the 8250 serial ports that run the keyboard and
642 to these serial ports.
645 bool "Console on Sun SU serial port"
648 If you would like to be able to use the SU serial port
658 Saying Y here will enable the hardware MUX serial driver for
672 bool "Support for console on serial MUX"
694 tristate "Sun Siemens SAB82532 serial support"
697 This driver supports the Siemens SAB82532 DUSCC serial ports on newer
699 serial ports.
702 bool "Console on Sun Siemens SAB82532 serial port"
705 If you would like to be able to use the SAB82532 serial port
717 tristate "SGI Zilog8530 serial support"
721 This driver supports the Zilog8530 serial ports found on SGI
722 systems. Say Y or M if you want to be able to these serial ports.
725 bool "Console on SGI Zilog8530 serial port"
730 tristate "SuperH SCI(F) serial port support"
735 int "Maximum number of SCI(F) serial ports"
754 to use serial ports, say Y. Otherwise, say N.
757 bool "Enable PNX8XX0 serial console"
762 to use serial console, say Y. Otherwise, say N.
765 tristate "LPC32XX high speed serial port support"
769 Support for the LPC32XX high speed serial ports (up to 900kbps).
775 bool "Enable LPC32XX high speed UART serial console"
779 If you would like to be able to use one of the high speed serial
793 bool "68328 serial support"
796 This driver supports the built-in serial port of the Motorola 68328
800 bool "Support RTS/CTS on 68328 serial port"
804 bool "Coldfire serial support"
808 This serial driver supports the Freescale Coldfire serial ports.
811 int "Default baudrate for Coldfire serial ports"
816 ColdFire serial ports. The usual default varies from board to board,
820 bool "Coldfire serial console support"
824 Enable a ColdFire internal serial port to be the system console.
831 This driver supports the Zilog z85C30 serial ports found on
833 Say Y or M if you want to be able to these serial ports.
841 8250 serial port driver also uses these numbers, which means
849 access the built-in serial ports on powermacs will need to
861 bool "Console on Mac or PowerMac z85c30 serial port"
865 If you would like to be able to use the z85c30 serial port
870 tristate "CPM SCC/SMC serial port support"
874 This driver supports the SCC and SMC serial ports on Motorola
878 bool "Support for console on CPM SCC/SMC serial port"
894 bool "SGI Altix L1 serial console support"
900 controller serial port as your console (you want this!),
904 tristate "Freescale MPC52xx/MPC512x family PSC serial support"
908 This driver supports MPC52xx and MPC512x PSC serial ports. If you would
914 bool "Console on a Freescale MPC52xx/MPC512x family PSC serial port"
918 Select this options if you'd like to use one of the PSC serial port
922 int "Freescale MPC52xx/MPC512x family PSC serial port baud"
936 This driver is for a family of multiport serial adapters
949 Say Y here if you want to use the M32R serial controller.
956 Say Y here if you want to support a serial console.
966 Say Y here if you want to use the M32R serial controller
992 bool "TX39XX/49XX SIO act as standard serial"
1010 a console on a serial port, say Y. Otherwise, say N.
1018 of cards which provide multiple serial ports. You would need
1029 tristate "SGI IOC4 controller serial support"
1034 and wish to use the serial ports on this card, say Y.
1038 tristate "SGI Altix IOC3 serial support"
1042 If you have an SGI Altix with an IOC3 serial card,
1046 bool "MSM on-chip serial port support"
1051 bool "MSM serial console support"
1057 bool "VIA VT8500 on-chip serial port support"
1062 bool "VIA VT8500 serial console support"
1067 bool "ETRAX FS serial port support"
1072 bool "ETRAX FS serial console support"
1077 tristate "NetX serial port support"
1082 can enable its onboard serial port by enabling this option.
1085 module will be called netx-serial.
1088 bool "Console on NetX serial port"
1092 If you have enabled the serial port on the Hilscher NetX SoC
1100 If you have a PowerPC based system that has serial ports
1106 tristate "OMAP serial port support"
1111 can enable its onboard serial ports by enabling this option.
1114 with the omap-serial driver. DMA support can be enabled from platform
1118 bool "Console on OMAP serial port"
1122 Select this option if you would like to use omap serial port as
1133 tristate "NWP serial port driver"
1139 This driver supports the cell network processor nwp serial
1143 bool "Console on NWP serial port"
1147 Support for Console on the NWP serial ports.
1150 bool "Lantiq serial driver"
1158 tristate "Freescale QUICC Engine serial port support"
1164 This driver supports the QE serial ports on Freescale embedded
1168 tristate "SCCNXP serial port support"
1176 bool "Console on SCCNXP serial port"
1180 Support for console on SCCNXP serial ports.
1183 tristate "SC16IS7xx serial support"
1188 This selects support for SC16IS7xx serial ports.
1276 bool "Console on BCM63xx serial port"
1281 If you have enabled the serial port on the BCM63xx CPU
1285 tristate "GRLIB APBUART serial support"
1289 Add support for the GRLIB APBUART serial port.
1292 bool "Console on GRLIB APBUART serial port"
1421 tristate "AR933X serial port support"
1432 bool "Console on AR933X serial port"
1439 int "Maximum number of AR933X serial ports"
1443 Set this to the number of serial ports you want the driver
1460 tristate "TILE-Gx on-chip serial port support"
1489 Set this to the number of serial ports you want the driver
1498 RocketPort INFINITY families of PCI/PCIe multiport serial adapters.
1517 tristate "Freescale lpuart serial port support"
1524 bool "Console on Freescale lpuart serial port"
1528 If you have enabled the lpuart serial port on the Freescale SoCs,
1532 tristate "Conexant Digicolor CX92xxx USART serial port support"
1539 bool "Console on Conexant Digicolor serial port"
1543 If you have enabled the USART serial port on Conexant Digicolor
1547 tristate "ST ASC serial port support"
1575 tristate "Support for Spreadtrum serial"
1579 This enables the driver for the Spreadtrum's serial.
1587 Support for early debug console using Spreadtrum's serial. This enables
1588 the console before standard serial driver is probed. This is enabled