Lines Matching refs:on
8 depends on HAS_IOMEM
23 depends on ARM_AMBA
33 bool "Support for console on AMBA serial port"
34 depends on SERIAL_AMBA_PL010=y
50 depends on ARM_AMBA
60 bool "Support for console on AMBA serial port"
61 depends on SERIAL_AMBA_PL011=y
78 depends on ARM64 || ARM
85 with "earlycon=smh" on the kernel command line. The console is
89 tristate "BCM1xxx on-chip DUART serial support"
90 depends on SIBYTE_SB1xxx_SOC=y
97 is implemented. Depending on the SOC configuration there may be
104 bool "Support for console on a BCM1xxx DUART serial port"
105 depends on SERIAL_SB1250_DUART=y
117 bool "AT91 / AT32 on-chip serial port support"
118 depends on ARCH_AT91 || AVR32
122 This enables the driver for the on-chip UARTs of the Atmel
126 bool "Support for console on AT91 / AT32 serial port"
127 depends on SERIAL_ATMEL=y
130 Say Y here if you wish to use an on-chip UART on a Atmel
136 bool "Support DMA transfers on AT91 / AT32 serial port"
137 depends on SERIAL_ATMEL
152 depends on SERIAL_ATMEL=y
169 depends on KGDB_SERIAL_CONSOLE
188 depends on ARCH_KS8695
194 bool "Support for console on KS8695 (Centaur) serial port"
195 depends on SERIAL_KS8695=y
205 depends on ARCH_MESON
208 This enables the driver for the on-chip UARTs of the Amlogic
212 bool "Support for console on meson"
213 depends on SERIAL_MESON=y
223 depends on ARCH_CLPS711X || COMPILE_TEST
227 This enables the driver for the on-chip UARTs of the Cirrus
231 bool "Support for console on CLPS711X serial port"
232 depends on SERIAL_CLPS711X=y
242 depends on PLAT_SAMSUNG || ARCH_EXYNOS
245 Support for the on-chip UARTs on the Samsung S3C24XX series CPUs,
247 provide all of these ports, depending on how the serial port
252 depends on SERIAL_SAMSUNG
259 depends on SERIAL_SAMSUNG
268 depends on SERIAL_SAMSUNG && DEBUG_LL
276 bool "Support for console on Samsung SoC serial port"
277 depends on SERIAL_SAMSUNG=y
281 Allow selection of the S3C24XX on-board serial ports for use as
293 depends on ARCH_SIRF
296 Support for the on-chip UART on the CSR SiRFprimaII series,
298 provide all of these ports, depending on how the serial port
302 bool "Support for console on SiRF SoC serial port"
303 depends on SERIAL_SIRFSOC=y
315 depends on ARCH_TEGRA && TEGRA20_APB_DMA
318 Support for the on-chip UARTs on the NVIDIA Tegra series SOCs
320 provide all of these ports, depending on how the serial port
326 depends on SPI
333 depends on SPI_MASTER
347 depends on MACH_DECSTATION && 32BIT
355 bool "Support console on DECstation DZ serial driver"
356 depends on SERIAL_DZ=y
365 Note that the firmware uses ttyS3 as the serial console on
372 depends on MACH_DECSTATION
385 bool "Support for console on a DECstation Z85C30 serial port"
386 depends on SERIAL_ZS=y
395 Note that the firmware uses ttyS1 as the serial console on the
396 Maxine and ttyS3 on the others using this driver.
402 depends on FOOTBRIDGE
405 If you have a machine based on a 21285 (Footbridge) StrongARM(R)/
410 bool "Console on DC21285 serial port"
411 depends on SERIAL_21285=y
414 If you have enabled the serial port on the 21285 footbridge you can
426 depends on MV64X60
432 bool "Support for console on Marvell MPSC serial port"
433 depends on SERIAL_MPSC
436 Say Y here if you want to support a serial console on a Marvell MPSC.
440 depends on ARCH_PXA || ARCH_MMP
443 If you have a machine based on an Intel XScale PXA2xx CPU you
447 bool "Console on PXA serial port"
448 depends on SERIAL_PXA
451 If you have enabled the serial port on the Intel XScale PXA
463 depends on ARCH_SA1100
466 If you have a machine based on a SA1100/SA1110 StrongARM(R) CPU you
472 bool "Console on SA1100 serial port"
473 depends on SERIAL_SA1100
476 If you have enabled the serial port on the SA1100/SA1110 StrongARM
488 depends on BLACKFIN
492 Add support for the built-in UARTs on the Blackfin.
498 bool "Console on Blackfin serial port"
499 depends on SERIAL_BFIN=y
504 depends on SERIAL_BFIN
512 depends on !DMA_UNCACHED_NONE && KGDB_SERIAL_CONSOLE=n
526 depends on SERIAL_BFIN
532 depends on SERIAL_BFIN_UART0
538 depends on SERIAL_BFIN && (!BF531 && !BF532 && !BF533 && !BF561)
544 depends on SERIAL_BFIN_UART1
550 depends on SERIAL_BFIN && (BF54x || BF538 || BF539)
556 depends on SERIAL_BFIN_UART2
562 depends on SERIAL_BFIN && (BF54x)
568 depends on SERIAL_BFIN_UART3
574 depends on ARCH_MXC
578 If you have a machine based on a Motorola IMX CPU you
582 bool "Console on IMX serial port"
583 depends on SERIAL_IMX=y
586 If you have enabled the serial port on the Freescale IMX
597 depends on PPC32 || MICROBLAZE || MFD_TIMBERDALE || ARCH_ZYNQ
606 bool "Support for console on Xilinx uartlite serial port"
607 depends on SERIAL_UARTLITE=y
616 depends on SPARC
623 depends on SPARC
625 This driver supports the Zilog8530 serial ports found on many Sparc
629 bool "Console on Sun Zilog8530 serial port"
630 depends on SERIAL_SUNZILOG=y
633 on your Sparc system as the console, you can do so by answering
638 depends on SPARC && PCI
641 mouse on (PCI) UltraSPARC systems. Say Y or M if you want to be able
645 bool "Console on Sun SU serial port"
646 depends on SERIAL_SUNSU=y
649 on your Sparc system as the console, you can do so by answering
654 depends on GSC
666 2. Edit the /etc/inittab to start a getty listening on /dev/ttyB0
667 3. Add device ttyB0 to /etc/securetty (if you want to log on as
668 root on this console.)
672 bool "Support for console on serial MUX"
673 depends on SERIAL_MUX=y
679 depends on PARISC && !SERIAL_MUX && VT
688 2. Edit the /etc/inittab to start a getty listening on /dev/ttyB0
689 3. Add device ttyB0 to /etc/securetty (if you want to log on as
690 root on this console.)
695 depends on SPARC && PCI
697 This driver supports the Siemens SAB82532 DUSCC serial ports on newer
702 bool "Console on Sun Siemens SAB82532 serial port"
703 depends on SERIAL_SUNSAB=y
706 on your Sparc system as the console, you can do so by answering
711 depends on SPARC64
713 This driver supports the console device found on SUN4V Sparc
718 depends on SGI_HAS_ZILOG
721 This driver supports the Zilog8530 serial ports found on SGI
725 bool "Console on SGI Zilog8530 serial port"
726 depends on SERIAL_IP22_ZILOG=y
731 depends on SUPERH || ARCH_SHMOBILE || COMPILE_TEST
736 depends on SERIAL_SH_SCI
740 bool "Support for console on SuperH SCI(F)"
741 depends on SERIAL_SH_SCI=y
746 depends on SERIAL_SH_SCI && SH_DMAE
750 depends on SOC_PNX833X
758 depends on SERIAL_PNX8XXX
766 depends on ARCH_LPC32XX && OF
770 Those are UARTs completely different from the Standard UARTs on the
776 depends on SERIAL_HS_LPC32XX=y
780 ports on the LPC32XX as the console, you can do so by answering
794 depends on M68328 || M68EZ328 || M68VZ328
800 bool "Support RTS/CTS on 68328 serial port"
801 depends on SERIAL_68328
805 depends on COLDFIRE
812 depends on SERIAL_MCF
821 depends on SERIAL_MCF
828 depends on (M68K && MAC) || PPC_PMAC
831 This driver supports the Zilog z85C30 serial ports found on
837 depends on SERIAL_PMACZILOG
839 The pmac_zilog driver for the z85C30 chip on many powermacs
849 access the built-in serial ports on powermacs will need to
857 Say N unless you need the z85c30 ports on your (Power)Mac
861 bool "Console on Mac or PowerMac z85c30 serial port"
862 depends on SERIAL_PMACZILOG=y
866 on your (Power)Mac as the console, you can do so by answering
871 depends on CPM2 || CPM1
874 This driver supports the SCC and SMC serial ports on Motorola
878 bool "Support for console on CPM SCC/SMC serial port"
879 depends on SERIAL_CPM=y
895 depends on IA64_GENERIC || IA64_SGI_SN2
905 depends on PPC_MPC52xx || PPC_MPC512x
914 bool "Console on a Freescale MPC52xx/MPC512x family PSC serial port"
915 depends on SERIAL_MPC52xx=y
923 depends on SERIAL_MPC52xx_CONSOLE=y
932 depends on PCI && PPC_PSERIES
945 depends on M32R
953 depends on SERIAL_M32R_SIO=y
962 bool "M32R SIO I/F on a PLD"
963 depends on SERIAL_M32R_SIO=y && (PLAT_OPSPUT || PLAT_USRV || PLAT_M32700UT)
967 on a PLD (Programmable Logic Device).
974 depends on HAS_TXX9_SERIAL
983 depends on SERIAL_TXX9
988 depends on SERIAL_TXX9=y
993 depends on !SERIAL_8250 && SERIAL_TXX9
997 depends on CPU_VR41XX
1006 depends on SERIAL_VR41XX=y
1010 a console on a serial port, say Y. Otherwise, say N.
1014 depends on PCI
1030 depends on (IA64_GENERIC || IA64_SGI_SN2) && SGI_IOC4
1034 and wish to use the serial ports on this card, say Y.
1039 depends on (IA64_GENERIC || IA64_SGI_SN2) && SGI_IOC3
1046 bool "MSM on-chip serial port support"
1047 depends on ARCH_QCOM
1052 depends on SERIAL_MSM=y
1057 bool "VIA VT8500 on-chip serial port support"
1058 depends on ARCH_VT8500
1063 depends on SERIAL_VT8500=y
1068 depends on ETRAX_ARCH_V32 && OF
1073 depends on SERIAL_ETRAXFS
1078 depends on ARCH_NETX
1081 If you have a machine based on a Hilscher NetX SoC you
1088 bool "Console on NetX serial port"
1089 depends on SERIAL_NETX=y
1092 If you have enabled the serial port on the Hilscher NetX SoC
1096 tristate "Serial port on Open Firmware platform bus"
1097 depends on OF
1098 depends on SERIAL_8250 || SERIAL_OF_PLATFORM_NWPSERIAL
1101 on a platform specific bus, you should enable this option.
1107 depends on ARCH_OMAP2PLUS
1110 If you have a machine based on an Texas Instruments OMAP CPU you
1118 bool "Console on OMAP serial port"
1119 depends on SERIAL_OMAP=y
1134 depends on PPC_DCR
1143 bool "Console on NWP serial port"
1144 depends on SERIAL_OF_PLATFORM_NWPSERIAL=y
1147 Support for Console on the NWP serial ports.
1151 depends on LANTIQ
1155 Support for console and UART on Lantiq SoCs.
1159 depends on QUICC_ENGINE
1164 This driver supports the QE serial ports on Freescale embedded
1176 bool "Console on SCCNXP serial port"
1177 depends on SERIAL_SCCNXP=y
1180 Support for console on SCCNXP serial ports.
1184 depends on I2C
1194 depends on BLACKFIN
1197 Enable SPORT emulate UART on Blackfin series.
1203 bool "Console on Blackfin sport emulated uart"
1204 depends on SERIAL_BFIN_SPORT=y
1209 depends on SERIAL_BFIN_SPORT && !(BF542 || BF544)
1215 depends on SERIAL_BFIN_SPORT0_UART
1221 depends on SERIAL_BFIN_SPORT
1227 depends on SERIAL_BFIN_SPORT1_UART
1233 depends on SERIAL_BFIN_SPORT && (BF54x || BF538 || BF539)
1239 depends on SERIAL_BFIN_SPORT2_UART
1245 depends on SERIAL_BFIN_SPORT && (BF54x || BF538 || BF539)
1251 depends on SERIAL_BFIN_SPORT3_UART
1258 depends on X86_32 || COMPILE_TEST
1260 Add support for UART controller on timberdale.
1265 depends on MIPS || ARM || COMPILE_TEST
1267 This enables the driver for the onchip UART core found on
1276 bool "Console on BCM63xx serial port"
1277 depends on SERIAL_BCM63XX=y
1281 If you have enabled the serial port on the BCM63xx CPU
1286 depends on OF && SPARC
1292 bool "Console on GRLIB APBUART serial port"
1293 depends on SERIAL_GRLIB_GAISLER_APBUART=y
1296 Support for running a console on the GRLIB APBUART
1306 depends on SERIAL_ALTERA_JTAGUART=y
1313 depends on SERIAL_ALTERA_JTAGUART_CONSOLE
1327 depends on SERIAL_ALTERA_UART
1336 depends on SERIAL_ALTERA_UART
1345 depends on SERIAL_ALTERA_UART=y
1352 depends on GPIOLIB && SPI
1354 Support for the IFX6x60 modem devices on Intel MID platforms.
1358 depends on PCI && (X86_32 || COMPILE_TEST)
1373 bool "Support for console on Intel EG20T PCH UART/OKI SEMICONDUCTOR ML7213 IOH"
1374 depends on SERIAL_PCH_UART=y
1384 depends on MSM_SMD
1390 depends on ARCH_MXS
1399 depends on SERIAL_MXS_AUART=y
1406 depends on OF
1414 depends on SERIAL_XILINX_PS_UART=y
1422 depends on HAVE_CLK && SOC_AR933X
1432 bool "Console on AR933X serial port"
1433 depends on SERIAL_AR933X=y
1440 depends on SERIAL_AR933X
1448 depends on ARM && (ARCH_EFM32 || COMPILE_TEST)
1451 This driver support the USART and UART ports on
1456 depends on SERIAL_EFM32_UART=y
1460 tristate "TILE-Gx on-chip serial port support"
1461 depends on TILEGX
1465 This device provides access to the on-chip UARTs on the TILE-Gx
1472 Driver for on-chip UART for ARC(Synopsys) for the legacy
1476 bool "Console on ARC UART"
1477 depends on SERIAL_ARC=y
1481 Enable system Console on ARC UART
1485 depends on SERIAL_ARC
1494 depends on PCI
1510 depends on SERIAL_RP2
1518 depends on HAS_DMA
1521 Support for the on-chip lpuart on some Freescale SOCs.
1524 bool "Console on Freescale lpuart serial port"
1525 depends on SERIAL_FSL_LPUART=y
1528 If you have enabled the lpuart serial port on the Freescale SoCs,
1533 depends on OF
1536 Support for the on-chip USART on Conexant Digicolor SoCs.
1539 bool "Console on Conexant Digicolor serial port"
1540 depends on SERIAL_CONEXANT_DIGICOLOR=y
1543 If you have enabled the USART serial port on Conexant Digicolor
1549 depends on ARM || COMPILE_TEST
1551 This driver is for the on-chip Asychronous Serial Controller on
1559 bool "Support for console on ST ASC"
1560 depends on SERIAL_ST_ASC=y
1566 depends on MCB
1569 on a MCB carrier.
1576 depends on ARCH_SPRD
1583 depends on SERIAL_SPRD=y
1589 with "earlycon" on the kernel command line. The console is