1152 	mr = BIT_3 | BIT_2 | BIT_1 | BIT_0;  in qla1280_set_target_parameters()
1226 	    (ha->bus_settings[bus].qtag_enables & (BIT_0 << target))) {  in qla1280_slave_configure()
1728 		err = qla1280_mailbox_command(ha, BIT_0 | BIT_1 | BIT_2, mb);  in qla1280_load_firmware_pio()
1800 				BIT_1 | BIT_0, mb);  in qla1280_load_firmware_dma()
1817 				BIT_1 | BIT_0, mb);  in qla1280_load_firmware_dma()
1862 	err = qla1280_mailbox_command(ha, BIT_1 | BIT_0, mb);  in qla1280_start_firmware()
1872 	err = qla1280_mailbox_command(ha, BIT_1 | BIT_0, &mb[0]);  in qla1280_start_firmware()
1939 					       BIT_3 | BIT_2 | BIT_1 | BIT_0,  in qla1280_init_rings()
1953 						 BIT_3 | BIT_2 | BIT_1 | BIT_0,  in qla1280_init_rings()
2127 	flag = (BIT_0 << target);  in qla1280_config_target()
2173 	status = qla1280_mailbox_command(ha, BIT_1 | BIT_0, &mb[0]);  in qla1280_config_bus()
2247 			     BIT_7 | BIT_3 | BIT_2 | BIT_1 | BIT_0);  in qla1280_nvram_config()
2259 	status |= qla1280_mailbox_command(ha, BIT_1 | BIT_0, &mb[0]);  in qla1280_nvram_config()
2265 	 	status |= qla1280_mailbox_command(ha, BIT_1 | BIT_0, mb);  in qla1280_nvram_config()
2280 	status |= qla1280_mailbox_command(ha, BIT_1 | BIT_0, mb);  in qla1280_nvram_config()
2289 					  BIT_1 | BIT_0, &mb[0]);  in qla1280_nvram_config()
2295 	status |= qla1280_mailbox_command(ha, BIT_2 | BIT_1 | BIT_0, &mb[0]);  in qla1280_nvram_config()
2309 	status |= qla1280_mailbox_command(ha, BIT_2 | BIT_1 | BIT_0, mb);  in qla1280_nvram_config()
2313 	status |= qla1280_mailbox_command(ha, BIT_1 | BIT_0, mb);  in qla1280_nvram_config()
2319 	status |= qla1280_mailbox_command(ha, BIT_2 | BIT_1 | BIT_0, mb);  in qla1280_nvram_config()
2323 	status |= qla1280_mailbox_command(ha, BIT_1 | BIT_0, mb);  in qla1280_nvram_config()
2329 	status |= qla1280_mailbox_command(ha, BIT_2 | BIT_1 | BIT_0, mb);  in qla1280_nvram_config()
2412 			data |= BIT_0;  in qla1280_nvram_request()
2485 		if (mr & BIT_0) {  in qla1280_mailbox_command()
2606 	status = qla1280_mailbox_command(ha, BIT_2 | BIT_1 | BIT_0, &mb[0]);  in qla1280_bus_reset()
2660 	status = qla1280_mailbox_command(ha, BIT_2 | BIT_1 | BIT_0, &mb[0]);  in qla1280_device_reset()
3437 	if (mailbox[0] & BIT_0) {  in qla1280_isr()
3500 			index = mailbox[6] & BIT_0;  in qla1280_isr()
3538 			index = mailbox[6] & BIT_0;  in qla1280_isr()
3978 	qla1280_mailbox_command(ha, BIT_6 | BIT_3 | BIT_2 | BIT_1 | BIT_0,  in qla1280_get_target_parameters()