317 	while(in_8(&mr->fifo_count))  in mesh_dump_regs()
318 		printk(KERN_DEBUG " fifo data=%.2x\n",in_8(&mr->fifo));  in mesh_dump_regs()
340 	(void)in_8(&mr->mesh_id);  in mesh_flush_io()
451 	if (in_8(&mr->bus_status1) & (BS1_BSY | BS1_SEL)) {  in mesh_start_cmd()
460 			if ((in_8(&mr->bus_status1) & (BS1_BSY | BS1_SEL)) == 0)  in mesh_start_cmd()
462 			if (in_8(&mr->interrupt) != 0) {  in mesh_start_cmd()
472 		if (in_8(&mr->bus_status1) & (BS1_BSY | BS1_SEL)) {  in mesh_start_cmd()
500 	if (in_8(&mr->interrupt) != 0) {  in mesh_start_cmd()
515 		if (in_8(&mr->interrupt) != 0)  in mesh_start_cmd()
521 	if (in_8(&mr->interrupt) == 0 && (in_8(&mr->bus_status1) & BS1_SEL)  in mesh_start_cmd()
522 	    && (in_8(&mr->bus_status0) & BS0_IO)) {  in mesh_start_cmd()
533 		for (t = 10; t > 0 && in_8(&mr->interrupt) == 0; --t)  in mesh_start_cmd()
538 		if (in_8(&mr->interrupt) == 0 && (in_8(&mr->bus_status1) & BS1_SEL)  in mesh_start_cmd()
539 		    && (in_8(&mr->bus_status0) & BS0_IO)) {  in mesh_start_cmd()
731 		if ((in_8(&mr->bus_status0) & BS0_ATN) == 0) {  in start_phase()
833 			ms->msgin[i++] = in_8(&mr->fifo);  in get_msgin()
903 	while ((in_8(&mr->bus_status1) & BS1_BSY) == 0) {  in reselected()
926 	if (in_8(&mr->fifo_count) == 0) {  in reselected()
933 		b = in_8(&mr->fifo);  in reselected()
935 	} while (in_8(&mr->fifo_count));  in reselected()
1035 	err = in_8(&mr->error);  in handle_error()
1036 	exc = in_8(&mr->exception);  in handle_error()
1044 		while ((in_8(&mr->bus_status1) & BS1_RST) != 0)  in handle_error()
1114 	if (ms->phase > selecting && (in_8(&mr->bus_status1) & BS1_BSY)) {  in handle_error()
1129 	exc = in_8(&mr->exception);  in handle_exception()
1328 		while (t > 0 && in_8(&mr->fifo_count) != 0  in halt_dma()
1370 	phase = in_8(&mr->bus_status0) & BS0_PHASE;  in phase_mismatch()
1495 		while ((in_8(&mr->bus_status0) & BS0_REQ) == 0 && --t >= 0)  in cmd_complete()
1500 		if (in_8(&mr->interrupt) & (INT_ERROR | INT_EXCEPTION)) {  in cmd_complete()
1504 			if (in_8(&mr->interrupt) & INT_ERROR) {  in cmd_complete()
1506 				       in_8(&mr->error));  in cmd_complete()
1510 			if (in_8(&mr->exception) != EXC_PHASEMM)  in cmd_complete()
1512 				       in_8(&mr->exception));  in cmd_complete()
1515 				       in_8(&mr->bus_status0));  in cmd_complete()
1519 		if (in_8(&mr->bus_status0) & BS0_REQ) {  in cmd_complete()
1568 			while ((in_8(&mr->bus_status0) & BS0_REQ) == 0) {  in cmd_complete()
1668 	while ((intr = in_8(&mr->interrupt)) != 0) {  in DEF_SCSI_QCMD()