598 	   inb( port + MSB_ID_Code ), inb( port + LSB_ID_Code ) );  in fdomain_is_valid_port()
607    if (inb( port + LSB_ID_Code ) != 0xe9) { /* test for 0x6127 id */  in fdomain_is_valid_port()
608       if (inb( port + LSB_ID_Code ) != 0x27) return 0;  in fdomain_is_valid_port()
609       if (inb( port + MSB_ID_Code ) != 0x61) return 0;  in fdomain_is_valid_port()
612       if (inb( port + MSB_ID_Code ) != 0x60) return 0;  in fdomain_is_valid_port()
621       if ((inb( port + Configuration2 ) & 0x80) == 0x80) {  in fdomain_is_valid_port()
623 	 if ((inb( port + Configuration2 ) & 0x80) == 0x00) {  in fdomain_is_valid_port()
641       result = inb( port_base + Read_Loopback );  in fdomain_test_loopback()
666    int options = inb(base + Configuration1);  in fdomain_get_irq()
1050       status = inb(port_base + TMC_Status);        /* Read adapter status */
1086       status = inb(port_base + SCSI_Status); /* Read adapter status */  in fdomain_select()
1142    if ((inb(port_base + TMC_Status) & 0x01) == 0)  in do_fdomain_16x0_intr()
1171       status = inb(port_base + TMC_Status);        /* Read adapter status */  in do_fdomain_16x0_intr()
1195       status = inb(port_base + SCSI_Status);  in do_fdomain_16x0_intr()
1225    status = inb(port_base + SCSI_Status);  in do_fdomain_16x0_intr()
1252 	 current_SC->SCp.Status = inb(port_base + Read_SCSI_Data);  in do_fdomain_16x0_intr()
1271 	 current_SC->SCp.Message = inb(port_base + Read_SCSI_Data);  in do_fdomain_16x0_intr()
1346 	       *current_SC->SCp.ptr++ = inb(port_base + Read_FIFO);  in do_fdomain_16x0_intr()
1508    imr = (inb( 0x0a1 ) << 8) + inb( 0x21 );  in DEF_SCSI_QCMD()
1510    irr = inb( 0xa0 ) << 8;  in DEF_SCSI_QCMD()
1512    irr += inb( 0x20 );  in DEF_SCSI_QCMD()
1514    isr = inb( 0xa0 ) << 8;  in DEF_SCSI_QCMD()
1516    isr += inb( 0x20 );  in DEF_SCSI_QCMD()
1524    printk( "SCSI Status      = 0x%02x\n", inb(port_base + SCSI_Status));  in DEF_SCSI_QCMD()
1525    printk( "TMC Status       = 0x%02x", inb(port_base + TMC_Status));  in DEF_SCSI_QCMD()
1526    if (inb((port_base + TMC_Status) & 1))  in DEF_SCSI_QCMD()
1529    printk("Interrupt Status = 0x%02x", inb(port_base + Interrupt_Status));  in DEF_SCSI_QCMD()
1530    if (inb(port_base + Interrupt_Status) & 0x08)  in DEF_SCSI_QCMD()
1534       printk("FIFO Status      = 0x%02x\n", inb(port_base + FIFO_Status));  in DEF_SCSI_QCMD()
1536 	      inb( port_base + Interrupt_Cond ) );  in DEF_SCSI_QCMD()
1538    printk( "Configuration 1  = 0x%02x\n", inb( port_base + Configuration1 ) );  in DEF_SCSI_QCMD()
1541 		 inb( port_base + Configuration2 ) );  in DEF_SCSI_QCMD()