Lines Matching refs:SCSI
233 * XXX SCSI-1 may require us to assume lun 0 if
241 * of the SCSI-2 spec for what messages are allowed when.
417 * Drive REQ on the bus by enabling SCSI PIO.
955 * transferring to the host, that the SCSI side of
1023 * regardless of the state of the SCSI FIFO.
1025 * SCSI FIFO to get data into the PCI FIFO
1121 * PHASEMIS is active). If we are doing a SCSI->Host transfer,
1278 * of how many bytes were transferred on the SCSI (as opposed to the
1299 * lost by some other type of SCSI I/O (e.g. PIO). If we have
1420 * fill the fifo and then enable SCSI
1965 * acknowledge the byte, then we do a dummy read from SCISDATL. The SCSI
2014 * the normal bus settle delay. [SCSI III SPI 10.11.0]
2255 * happen for SCSI transfers as the SCSI module