Lines Matching refs:We

149 	 * We have received good status for this transaction.  There may
328 	 * list updates.  We also record the SCB's
555 		 *    CURRSCB nor LASTSCB can be trusted.  We must
612  * We have been reselected as an initiator
653  * We have successfully selected out.
752 	 * We know that neither the per-TID list nor the list of
916 		 * see a phase change.  We thus treat any phasemiss
1170  * We received a "command complete" message.  Put the SCB on the complete
1182 	 * and then attempt to complete the command again.  We should use a
1263 	 * in the sequencer.  We don't want to corrupt
1329 	 * We only set BUSFREE status once either a new
1379  * code do the rest.  We also reset/reallocate the FIFO to make
1397 		 * that violate the SCSI spec.  We are careful not to
1523 	 * We fetch a "cacheline aligned" and sized amount of data
1678 	/* We have seen a data phase at least once. */
1699 	 * We have two goals here.  Do as much other work
1716 	 * We have enabled the auto-ack feature.  This means
1722 	 * non-empty.  We know there is more data yet to transfer
1734 	 * the dma code again.  We will only loop if there is a
1755 		 * initiator before changing phase.  We only need to
1775  * We assume that, even though data may still be
1814 	 * in addition to the currently active element.  We
1829 	clr	SCB_RESIDUAL_DATACNT[3]; /* We are not the last seg */
1861 		 * first few data transfers on the bus.  We detect this
1880 		 * savepointer in the current FIFO.  We do this so that
1920  * has a residual.  This should occur coincident with a ctxtdone.  We
2027  * or we have a pending NONPACKREQ for this FIFO.  We differentiate
2177 	 * We increment the count here to make the nonpkt handler
2236  * We have entered an overrun situation.  If we have working