Lines Matching refs:driver
32 To compile this driver as a module, choose M here and read
85 To compile this driver as a module, choose M here and read
89 Do not compile this driver as a module if your root file system
91 In this case, do not compile the driver for your SCSI host adapter
104 To compile this driver as a module, choose M here and read
112 standard st driver, but instead need this special osst driver and
117 tapes (QIC-157) and can be driven by the standard driver st.
121 More info on the OnStream driver may be found on
126 To compile this driver as a module, choose M here and read
139 To compile this driver as a module, choose M here and read
169 driver software yourself. Please read the file
172 To compile this driver as a module, choose M here and read
181 This is a driver for SCSI media changers. Most common devices are
321 through an IP network. The driver uses the iSCSI protocol to transport
323 (the "initiator") and "targets". Architecturally, the iSCSI driver
326 Fibre Channel (FC) adapter driver with a Host Bus Adapter (HBA).
328 To compile this driver as a module, choose M here: the
331 The userspace component needed to initialize the driver, documentation,
370 tristate "HP Smart Array SCSI driver"
374 This driver supports HP Smart Array Controllers (circa 2009).
375 It is a SCSI alternative to the cciss driver, which is a block
376 driver. Anyone wishing to use HP Smart Array controllers who
384 This driver supports the 9000 series 3ware SATA-RAID cards.
395 This driver supports the LSI 3ware 9750 6Gb/s SAS/SATA-RAID cards.
407 This driver supports the Western Digital 7000 SCSI host adapter
411 To compile this driver as a module, choose M here: the
418 This driver supports the ACARD SCSI host adapter.
420 To compile this driver as a module, choose M here: the
429 This is a driver for the AHA-1510, AHA-1520, AHA-1522, and AHA-2825
437 To compile this driver as a module, choose M here: the
451 To compile this driver as a module, choose M here: the
464 To compile this driver as a module, choose M here: the
471 This driver supports a variety of Dell, HP, Adaptec, IBM and
475 To compile this driver as a module, choose M here: the module
485 tristate "Marvell UMI driver"
488 Module for Marvell Universal Message Interface(UMI) driver
490 To compile this driver as a module, choose M here: the
497 This driver supports all of Adaptec's I2O based RAID controllers as
499 driver by Deanna Bonds. See <file:Documentation/scsi/dpti.txt>.
501 To compile this driver as a module, choose M here: the
509 This is a driver for all SCSI host adapters manufactured by
513 To compile this driver as a module, choose M here: the
525 To compile this driver as a module, choose M here: the
532 This driver supports all of ARECA's SATA/SAS RAID controller cards.
533 This is an ARECA-maintained driver by Erich Chen.
538 To compile this driver as a module, choose M here: the
554 To compile this driver as a module, choose M here; the module
569 To compile this driver as a module, choose M here: the
577 BusLogic SCSI driver. The FlashPoint SCCB Manager code is
582 tristate "VMware PVSCSI driver support"
585 This driver supports VMware's para virtualized SCSI HBA.
586 To compile this driver as a module, choose M here: the
590 tristate "XEN SCSI frontend driver"
594 The XEN SCSI frontend driver allows the kernel to access SCSI Devices
600 tristate "Microsoft Hyper-V virtual storage driver"
604 Select this option to enable the Hyper-V virtual storage driver.
633 To compile this driver as a module, choose M here and read
644 To compile this driver as a module, choose M here: the
658 To compile this driver as a module, choose M here: the
665 This driver supports all EATA/DMA-compliant SCSI host adapters. DPT
674 To compile this driver as a module, choose M here: the
706 by the driver for each probed SCSI device is reported at boot time.
713 This driver supports all EATA-PIO protocol compliant SCSI Host
715 host adapters could also use this driver but are discouraged from
716 doing so, since this driver only supports hard disks and lacks
720 To compile this driver as a module, choose M here: the
736 and should use the aic7xxx driver ("Adaptec AIC7xxx chipset SCSI
737 controller support"). This Future Domain driver works with the older
740 To compile this driver as a module, choose M here: the
749 This is a driver for RAID/SCSI Disk Array Controllers (EISA/ISA/PCI)
754 To compile this driver as a module, choose M here: the
763 This driver supports the 6Gb/s SAS capabilities of the storage
771 This is a driver for the old NCR 53c80 series of SCSI controllers
775 you should select the specific driver for that card rather than
783 To compile this driver as a module, choose M here: the
791 This is a driver for the old NCR 53c80 series of SCSI controllers
798 To compile this driver as a module, choose M here: the
806 You might as well try it out. Note that this driver will only probe
819 for more information. If this driver does not work correctly
823 To compile this driver as a module, choose M here: the
833 To compile this driver as a module, choose M here: the
843 To compile this driver as a module, choose M here: the
847 bool "enable driver internal trace"
851 If you say Y here, the driver will trace all commands issued
863 To compile this driver as a module, choose M here: the
874 To compile this driver as a module, choose M here: the
881 This driver supports older versions of IOMEGA's parallel port ZIP
893 For more information about this driver and how to use it you should
896 <http://www.tldp.org/docs.html#howto>. If you use this driver,
901 To compile this driver as a module, choose M here: the
908 This driver supports newer versions of IOMEGA's parallel port ZIP
920 For more information about this driver and how to use it you should
923 <http://www.tldp.org/docs.html#howto>. If you use this driver,
928 To compile this driver as a module, choose M here: the
969 To compile this driver as a module, choose M here: the
977 This is a driver for the MicroChannel Dual 700 card produced by
989 This is a driver for the SCSI controller in the Lasi chip found in
999 This is a driver for the onboard SCSI controller found in older
1011 This driver supports Promise SuperTrak EX series storage controllers.
1016 To compile this driver as a module, choose M here: the
1029 This driver supports the whole NCR53C8XX/SYM53C8XX family of
1033 controllers; you need to use the Fusion MPT driver for that.
1046 When set to 0, the driver will program the chip to only perform
1048 to addresses up to 1TB. When set to 2, the driver supports the
1067 driver will announce to the generic SCSI layer for devices
1079 possible. The driver supports up to 256 queued commands per device.
1096 This driver supports the IBM Power Linux family RAID adapters.
1101 bool "enable driver internal trace"
1105 If you say Y here, the driver will trace all commands issued
1114 If you say Y here, the driver will support adapter crash dump.
1134 This is a driver for the MicroChannel Quad 720 card produced by
1200 Note that 80 should normally be ok since the driver decreases the
1204 since the driver will get this information from the user set-up. It
1206 (example): 'ncr53c8xx=sync:12' will allow the driver to negotiate
1211 select the maximum value 80 allowing the driver to use the maximum
1239 To compile this driver as a module, choose M here: the
1246 This is a driver for the ISA, VLB, and PCMCIA versions of the Qlogic
1250 This driver does NOT support the PCI versions of these cards. The
1251 PCI versions are supported by the Qlogic ISP driver ("Qlogic ISP
1254 Information about this driver is contained in
1259 To compile this driver as a module, choose M here: the
1268 To compile this driver as a module, choose M here: the
1275 This driver supports SBUS SCSI controllers from PTI or QLogic. These
1278 driven by a different driver.
1280 To compile this driver as a module, choose M here: the
1292 This lpfc driver supports the Emulex LightPulse
1299 This makes debugging information from the lpfc driver
1307 This driver is for NCR53c710 based SCSI host adapters.
1316 adapter that comes with some HP scanners. This driver requires that
1319 are using isapnp then you need to compile this driver as a module
1321 of the configured card(s) should be passed to the driver. The format
1326 To compile this driver as a module, choose M here: the
1333 This driver supports PCI SCSI host adapters based on the ASIC
1336 This driver works, but is still in experimental status. So better
1341 To compile this driver as a module, choose M here: the
1345 tristate "Tekram DC390(T) and Am53/79C974 SCSI support (new driver)"
1349 This driver supports PCI SCSI host adapters based on the Am53C974A
1352 This is a new implementation base on the generic esp_scsi driver.
1356 Note that this driver does NOT support Tekram DC390W/U/F, which are
1359 To compile this driver as a module, choose M here: the
1376 To compile this driver as a module, choose M here: the
1385 information about this hardware. If the driver doesn't work out of
1389 another driver for the same hardware: "UltraStor SCSI support",
1393 To compile this driver as a module, choose M here: the
1425 by the driver for each probed SCSI device is reported at boot time.
1433 adapter family. This driver is explained in section 3.12 of the
1439 Note that there is also another driver for the same hardware:
1442 To compile this driver as a module, choose M here: the
1453 To compile this driver as a module, choose M here: the
1461 This is a driver for Western Digital WD7193, WD7197 and WD7296 PCI
1469 This pseudo driver simulates one or more hosts (SCSI initiators),
1486 To compile this driver as a module, choose M here: the
1517 To compile this driver as a module, choose M here: the
1527 This is the driver for the onboard SCSI host adapter of MIPS Magnum
1538 To compile this driver as a module, choose M here: the
1548 To compile this driver as a module, choose M here: the
1558 answer N. This driver does NOT work for the T-Rex series of
1561 To compile this driver as a module, choose M here: the
1572 To compile this driver as a module, choose M here: the
1601 To compile this driver as a module, choose M here: the
1604 This driver supports both styles of NCR integration into the
1644 To compile this driver as a module, choose M here: the module
1648 bool "WD33C93 SCSI driver for MVME147"
1656 tristate "NCR53C710 SCSI driver for MVME16x"
1665 tristate "NCR53C710 SCSI driver for BVME6000"
1697 This is the driver for the Sun ESP SCSI host adapter. The ESP
1702 To compile this driver as a module, choose M here: the
1706 tristate "FCP host bus adapter driver for IBM eServer zSeries"
1715 This driver is also available as a module. This module will be
1723 This driver supports the PMC SIERRA MaxRAID adapters.
1726 tristate "PMC-Sierra SPC 8001 SAS/SATA Based Host Adapter driver"
1730 This driver supports PMC-Sierra PCIE SAS/SATA 8x6G SPC 8001 chip
1738 This bfa driver supports all Brocade PCIe FC/FCOE host adapters.
1740 To compile this driver as a module, choose M here. The module will
1748 This is the virtual HBA driver for virtio. If the kernel will