98 #define printdev(X) (&X->spi->dev)  macro
119 		dev_err(printdev(devrec),  in write_short_reg()
145 		dev_err(printdev(devrec),  in read_short_reg()
176 		dev_err(printdev(devrec),  in read_long_reg()
207 		dev_err(printdev(devrec),  in write_long_reg()
239 …dev_err(printdev(devrec), "write_tx_buf() was passed too large a buffer. Performing short write.\n…  in write_tx_buf()
257 		dev_err(printdev(devrec), "SPI write Failed for TX buf\n");  in write_tx_buf()
294 		dev_err(printdev(devrec), "Invalid length read from device. Performing short read.\n");  in mrf24j40_read_rx_buf()
300 		dev_err(printdev(devrec), "Buffer not big enough. Performing short read\n");  in mrf24j40_read_rx_buf()
317 		dev_err(printdev(devrec), "SPI RX Buffer Read Failed.\n");  in mrf24j40_read_rx_buf()
341 	dev_dbg(printdev(devrec), "tx packet of %d bytes\n", skb->len);  in mrf24j40_tx()
366 		dev_warn(printdev(devrec), "Timeout waiting for TX interrupt\n");  in mrf24j40_tx()
376 		dev_dbg(printdev(devrec), "Error Sending. Retry count exceeded\n");  in mrf24j40_tx()
379 		dev_dbg(printdev(devrec), "Packet Sent\n");  in mrf24j40_tx()
400 	dev_dbg(printdev(devrec), "start\n");  in mrf24j40_start()
417 	dev_dbg(printdev(devrec), "stop\n");  in mrf24j40_stop()
432 	dev_dbg(printdev(devrec), "Set Channel %d\n", channel);  in mrf24j40_set_channel()
462 	dev_dbg(printdev(devrec), "filter\n");  in mrf24j40_filter()
473 		dev_dbg(printdev(devrec),  in mrf24j40_filter()
502 		dev_dbg(printdev(devrec), "Set PANID to %04hx\n", filt->pan_id);  in mrf24j40_filter()
523 		dev_dbg(printdev(devrec), "Set Pan Coord to %s\n",  in mrf24j40_filter()
554 		dev_err(printdev(devrec), "Failure reading RX FIFO\n");  in mrf24j40_handle_rx()
568 	dev_dbg(printdev(devrec), "RX Handled\n");  in mrf24j40_handle_rx()
757 	dev_dbg(printdev(devrec), "registered mrf24j40\n");  in mrf24j40_probe()
775 		dev_err(printdev(devrec), "Unable to get IRQ");  in mrf24j40_probe()
794 	dev_dbg(printdev(devrec), "remove\n");  in mrf24j40_remove()